Am Mittwoch, 22. Juni 2016, 12:35:25 CEST schrieb Jürgen Horzella: > Hallo Stefan, > > danke, die Einstellung habe ich überprüft, war bereits auf Other OS. Und > sonst steht "eigentlich" alles auf Legacy. > Hallo Jürgen, ich hatte solch ein Problem mal mit einem UEFI-Rechner. Boot per Netzwerk, Absturz von pxelinux, Boot per Netzwerk, ...
Bei mir hat geholfen, die Rechner im UEFI-Modus mit Linbo 2.3 zu konfigurieren. Gruß, Frank > Viele Grüße > Jürgen > > 2016-06-22 10:46 GMT+02:00 Stefan Leßmann <[email protected]>: > > Hallo Jürgen, > > > > ich hatte so ein Reboot-Schleifen-Problem gerade eben an zwei Rechnern > > auch und konnte es beheben (wobei ich nicht weiß und nicht weiter > > nachgeforscht habe, woran es lag...): Ich bin zwischen den Reboots ins > > BIOS, habe dort etwas geändert (bei mir stand bei Secure Boot als OS > > noch Windows drin, bin auf "Other OS"), danach hat er korrekt > > gebootet, ohne Endlosschleife. > > > > Grüße, > > Stefan > > > > Stefan Leßmann > > > > Laura-Schradin-Schule Reutlingen > > Bismarckstr. 17 > > 72764 Reutlingen > > > > Tel.: 07121/485-211 > > Fax: 07121/485-490 > > > > > > 2016-06-22 9:47 GMT+02:00 Jürgen Horzella <[email protected] > > > > > Hallo, > > > > > > ich probiers nochmal unter einem neuen Betreff. > > > > > > Beim Reboot-Workaround bin ich in einer Endlosschleife gefangen, es wird > > > immer nach Linbo gebootet. > > > Angehängt ist die start.conf sowie die pxelinuxx.cfg > > > Im Abschnitt reboot der pxelinux.cfg habe ich beide Zeilen ausprobiert. > > > > > > Hat jemand eine Idee? > > > > > > Viele Grüße > > > Jürgen > > > > > > pxelinux.cfg/trusty714reboot > > > > > >> # template for the default pxelinux config file > > >> # > > >> # if you don't want this file being overwritten by workstations import > > >> remove the following line > > >> # ### managed by linuxmuster.net ### > > >> # > > >> # [email protected] > > >> # 10.02.2014 > > >> # # use "reboot" instead of "linbo" for clients which need the reboot > > >> workaround > > >> DEFAULT reboot # you have to uncomment next line if you want to be able > > > > to > > > > >> type options on the boot prompt > > >> #PROMPT 1 # 3 secs boot prompt timeout > > >> TIMEOUT 30 KBDMAP /german.kbd > > >> DISPLAY /boot.msg # the default boot method, pxelinux boots linbo > > >> kernel > > >> directly > > >> LABEL linbo > > >> KERNEL linbo > > >> APPEND initrd=linbofs.lz vga=788 quiet splash splash autostart=0 # boot > > >> method to use with reboot workaround > > >> LABEL reboot > > >> KERNEL grub.exe > > >> #APPEND keeppxe --config-file=pxe basedir /; default 0; timeout 0; > > >> hiddenmenu; title REBOOT; fallback 1; find --ignore-floppies > > >> --ignore-cd > > >> --set-root /.linbo.reboot; cmp /.linbo.reboot /.grub.reboot || ls > > > > FALLBACK; > > > > >> write /.grub.reboot DONE; ls /boot/grub/menu.lst && configfile > > >> /boot/grub/menu.lst; ls /menu.lst && configfile /menu.lst; chainloader > > > > +1; > > > > >> title LINBO PXE; kernel (pd)/linbo quiet splash vga=788 splash > > > > autostart=0; > > > > >> initrd (pd)/linbofs.lz; > > >> APPEMD --config-file=root (hd0,0); kernel /vmlinuz ro quiet splash > > >> root=/dev/sda1; initrd /initrd.img; # to boot LINBO in debug mode > > >> simply > > >> type "debug" on boot prompt and press ENTER > > >> LABEL debug > > >> KERNEL linbo > > >> APPEND initrd=linbofs.lz vga=788 debug splash autostart=0 > > > > > > start.conf.trusty714reboot > > > > > >> # template for the default pxelinux config file > > >> # > > >> # if you don't want this file being overwritten by workstations import > > >> remove the following line > > >> # ### managed by linuxmuster.net ### > > >> # > > >> # [email protected] > > >> # 10.02.2014 > > >> # > > >> # use "reboot" instead of "linbo" for clients which need the reboot > > >> workaround > > >> DEFAULT reboot > > >> # you have to uncomment next line if you want to be able to type > > >> options > > >> on the boot prompt > > >> #PROMPT 1 > > >> # 3 secs boot prompt timeout > > >> TIMEOUT 30 > > >> KBDMAP /german.kbd > > >> DISPLAY /boot.msg > > >> # the default boot method, pxelinux boots linbo kernel directly > > >> LABEL linbo > > >> KERNEL linbo > > >> APPEND initrd=linbofs.lz vga=788 quiet splash splash autostart=0 > > >> # boot method to use with reboot workaround > > >> LABEL reboot > > >> KERNEL grub.exe > > >> #APPEND keeppxe --config-file=pxe basedir /; default 0; timeout 0; > > >> hiddenmenu; title REBOOT; fallback 1; find --ignore-floppies > > >> --ignore-cd > > >> --set-root /.linbo.reboot; cmp /.linbo.reboot /.grub.reboot || ls > > > > FALLBACK; > > > > >> write /.grub.reboot DONE; ls /boot/grub/menu.lst && configfile > > >> /boot/grub/menu.lst; ls /menu.lst && configfile /menu.lst; chainloader > > > > +1; > > > > >> title LINBO PXE; kernel (pd)/linbo quiet splash vga=788 splash > > > > autostart=0; > > > > >> initrd (pd)/linbofs.lz; > > >> APPEND --config-file=root (hd0,0); kernel /vmlinuz ro quiet splash > > >> root=/dev/sda1; initrd /initrd.img; > > >> # to boot LINBO in debug mode simply type "debug" on boot prompt and > > > > press > > > > >> ENTER > > >> LABEL debug > > >> KERNEL linbo > > >> APPEND initrd=linbofs.lz vga=788 debug splash autostart=0 > > > > > > _______________________________________________ > > > linuxmuster-user mailing list > > > [email protected] > > > https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user > > > > _______________________________________________ > > linuxmuster-user mailing list > > [email protected] > > https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user _______________________________________________ linuxmuster-user mailing list [email protected] https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
