Hallo Thomas,

hier die Ausgabe von lsusb -v

Bus 001 Device 012: ID 0b95:772b ASIX Electronics Corp. AX88772B
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0b95 ASIX Electronics Corp.
  idProduct          0x772b AX88772B
  bcdDevice            0.01
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           53
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           5
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol      0
      iInterface              7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              11
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Die ohg215-01_linbo.log und die vorige Version dieser Datei schicke ich im Anhang.

Viele Grüße

Bernd

Am 28.07.2016 um 18:25 schrieb Thomas Schmitt:
Hallo Bernd,

Am 28.07.2016 um 17:47 schrieb Bernd Kaiser:
Hallo Holger, hallo Thomas

vielen Dank für das Paket und eure Bemühungen. Mit der Linbo-Version
2.3.0-35 klappt es wieder wie gewohnt: Client-IP und MAC-Adresse wird
angezeigt und die Verbindung zum Server steht. Auch wie gewohnt
funktioniert die Tastatur des Convertibles nicht. Dann ist wohl doch ein
fehlender/neuer USB-Treiber Schuld?
Gibt es da bald eine Lösung?

Was ist denn genau die Produktbezeichnung?
Der Netzwerkadapter ist ein wohl ein AX88772B von Asix. Das dazu
benötigte Modul asix.ko ist im neuen Kernel vorhanden. Deshalb verstehe
ich nicht, dass das Ding nicht funktioniert.

Schick mir doch bitte nochmal die Ausgabe von lsusb -v (ist
gesprächiger) und die Linbo-Logdatei des Rechners
(<Rechnername>_linbo.log).

VG, Thomas



_______________________________________________
linuxmuster-user mailing list
linuxmuster-user@lists.linuxmuster.net
https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user

## Log session begin: Thu Jul 28 18:02:45 CEST 2016 ##
## Hardware-Setup - Anfang ##
Initializing cgroup subsys cpu
Linux version 4.2.0 (root@proxy) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.1) ) #1 SMP Fri Mar 18 17:51:45 CET 2016
Command line: BOOT_IMAGE=/linbo64 quiet splash dhcpretry=10 netboot
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000965affff] usable
BIOS-e820: [mem 0x00000000965b0000-0x0000000096eaffff] reserved
BIOS-e820: [mem 0x0000000096eb0000-0x000000009b6befff] usable
BIOS-e820: [mem 0x000000009b6bf000-0x000000009b8befff] type 20
BIOS-e820: [mem 0x000000009b8bf000-0x000000009bebefff] reserved
BIOS-e820: [mem 0x000000009bebf000-0x000000009bfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009bfbf000-0x000000009bffefff] ACPI data
BIOS-e820: [mem 0x000000009bfff000-0x000000009bffffff] usable
BIOS-e820: [mem 0x000000009c000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi:  ACPI=0x9bffe000  ACPI 2.0=0x9bffe014  SMBIOS=0x9bebef98 
SMBIOS 2.8 present.
DMI: Acer Aspire SW5-171P/Longchamp_S, BIOS V1.04 11/7/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-combining
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 0080000000 mask 7FE0000000 write-back
  2 base 009C000000 mask 7FFC000000 uncachable
  3 base 00FFB00000 mask 7FFFF00000 write-protect
  4 base 00FFC00000 mask 7FFFC00000 write-protect
  5 base 0100000000 mask 7F80000000 write-back
  6 base 015F600000 mask 7FFFE00000 uncachable
  7 base 015F800000 mask 7FFF800000 uncachable
  8 base 0160000000 mask 7FE0000000 uncachable
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x9c000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000007c000] 7c000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x018e3000, 0x018e3fff] PGTABLE
BRK [0x018e4000, 0x018e4fff] PGTABLE
BRK [0x018e5000, 0x018e5fff] PGTABLE
init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
 [mem 0x15f400000-0x15f5fffff] page 2M
BRK [0x018e6000, 0x018e6fff] PGTABLE
init_memory_mapping: [mem 0x140000000-0x15f3fffff]
 [mem 0x140000000-0x15f3fffff] page 2M
init_memory_mapping: [mem 0x120000000-0x13fffffff]
 [mem 0x120000000-0x13fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x965affff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x963fffff] page 2M
 [mem 0x96400000-0x965affff] page 4k
init_memory_mapping: [mem 0x96eb0000-0x9b6befff]
 [mem 0x96eb0000-0x96ffffff] page 4k
 [mem 0x97000000-0x9b5fffff] page 2M
 [mem 0x9b600000-0x9b6befff] page 4k
BRK [0x018e7000, 0x018e7fff] PGTABLE
BRK [0x018e8000, 0x018e8fff] PGTABLE
init_memory_mapping: [mem 0x9bfff000-0x9bffffff]
 [mem 0x9bfff000-0x9bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 1G
RAMDISK: [mem 0x35ee4000-0x36f69fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009BFFE014 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000009BFFE210 0000E4 (v01 ACRSYS ACRPRDCT 00000001      01000013)
ACPI: FACP 0x000000009BFEF000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 0x000000009BFD3000 0182EE (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 0x000000009BF9D000 000040
ACPI: ECDT 0x000000009BFFD000 0000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: UEFI 0x000000009BFFC000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009BFF7000 00497A (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: FPDT 0x000000009BFF5000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MSDM 0x000000009BFF4000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009BFF3000 000496 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: SSDT 0x000000009BFF2000 00004A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: TPM2 0x000000009BFF1000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: ASF! 0x000000009BFF0000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 0x000000009BFEE000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 0x000000009BFED000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 0x000000009BFEC000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SLIC 0x000000009BFD2000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009BFD1000 0008BB (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BOOT 0x000000009BFCF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: LPIT 0x000000009BFCE000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: ASPT 0x000000009BFCD000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DBGP 0x000000009BFCC000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009BFC9000 000494 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000009BFC8000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000009BFC4000 0034D9 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: CSRT 0x000000009BFC2000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BGRT 0x000000009BFC3000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015ac00000-ffff88015e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000015f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000006efff]
  node   0: [mem 0x0000000000070000-0x0000000000087fff]
  node   0: [mem 0x0000000000100000-0x00000000965affff]
  node   0: [mem 0x0000000096eb0000-0x000000009b6befff]
  node   0: [mem 0x000000009bfff000-0x000000009bffffff]
  node   0: [mem 0x0000000100000000-0x000000015f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
On node 0 totalpages: 1024838
  DMA zone: 56 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3974 pages, LIFO batch:0
  DMA32 zone: 8617 pages used for memmap
  DMA32 zone: 630208 pages, LIFO batch:31
  Normal zone: 5341 pages used for memmap
  Normal zone: 390656 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82712 r8192 d31976 u262144
pcpu-alloc: s82712 r8192 d31976 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1010802
Kernel command line: BOOT_IMAGE=/linbo64 quiet splash dhcpretry=10 netboot
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 28672 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 65536 bytes
early log buf free: 21080(64%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3863184K/4099352K available (5479K kernel code, 411K rwdata, 1880K rodata, 852K init, 432K bss, 236168K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
NR_IRQS:4352 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.575 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.15 BogoMIPS (lpj=14965750)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff8186f000 - ffffffff81876000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-4012Y CPU @ 1.50GHz (fam: 06, model: 45, stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11972.60 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9bebf000-0x9bfbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
xor: automatically using best checksumming function:
   avx       : 19395.600 MB/sec
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1   gen()  4318 MB/s
raid6: sse2x1   xor()  2967 MB/s
raid6: sse2x2   gen()  5602 MB/s
raid6: sse2x2   xor()  3843 MB/s
raid6: sse2x4   gen()  6651 MB/s
raid6: sse2x4   xor()  4574 MB/s
raid6: avx2x1   gen()  8510 MB/s
raid6: avx2x2   gen() 10065 MB/s
raid6: avx2x4   gen() 11775 MB/s
raid6: using algorithm avx2x4 gen() 11775 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015A220000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015A829800 0005AA (v01 PmRef  ApIst    00003000 INTL 20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015A272800 000119 (v01 PmRef  ApCst    00003000 INTL 20131115)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb0518000-0xb051bfff 64bit]
pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb0510000-0xb0517fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb0520000-0xb052001f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb051c000-0xb051ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb0524000-0xb05243ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb0523000-0xb05237ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0521000-0xb05210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xb0522000-0xb0522fff 64bit]
pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xb0400000-0xb047ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x38, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x965b0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9b6bf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] could not be reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:04: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xb0480000-0xb048ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xb0400000-0xb04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16920K (ffff880035ee4000 - ffff880036f6a000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8fec0000-0x93ec0000] (64MB) mapped at [ffff88008fec0000-ffff880093ebffff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
efifb: probing for efifb
efifb: framebuffer at 0xa0000000, mapped to 0xffffc90000800000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
checking generic (a0000000 7f0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (50 C)
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.5.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <bec...@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.4.2.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver idmouse
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
NET: Registered protocol family 15
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
Btrfs loaded
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 852K (ffffffff8179a000 - ffffffff8186f000)
systemd-udevd[925]: starting version 204
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-acpi INT33C6:00: No vmmc regulator found
sdhci-acpi INT33C6:00: No vqmmc regulator found
mmc0: SDHCI controller on ACPI [INT33C6:00] using ADMA
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x9 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523280 irq 41
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0524000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON RBU-SNS8100S360GD, S8FM06.9, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON RBU-SNS 06.9 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: new high-speed USB device number 2 using ehci-pci
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-3: new high-speed USB device number 3 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 1496.535 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159259799ff, max_idle_ns: 440795263419 ns
usb 1-4: new high-speed USB device number 4 using xhci_hcd
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:e0:22:f9
usbcore: registered new interface driver asix
usb 1-7: new full-speed USB device number 5 using xhci_hcd
## Hardware-Setup - Ende ##
Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
## Log session end: Thu Jul 28 18:02:45 CEST 2016 ##
## Log session begin: Thu Jul 28 18:07:46 CEST 2016 ##
Cluster size has been automatically set to 4096 bytes.
Creating NTFS volume structures.
mkntfs completed successfully. Have a nice day.
1+0 records in
1+0 records out
8 bytes (8B) copied, 0.000349 seconds, 22.4KB/s
## Log session end: Thu Jul 28 18:07:46 CEST 2016 ##
## Log session begin: Thu Jul 28 18:07:49 CEST 2016 ##
Stelle Windows-Bootdateien auf EFI-Partition wieder her.
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0003,0000,2001,2002,2003
Boot0000* grub
Boot0001* Network Boot-IPV4: 00-0E-C6-E0-22-F9
Boot0002* Network Boot-IPV6: 00-0E-C6-E0-22-F9
Boot0004* KINGSTON RBU-SNS8100S360GD      
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Boot0003* Windows Boot Manager
Stelle EFI-Standardboot wieder her.
BootNext: 0003
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0003,0000,2001,2002,2003
Boot0000* grub
Boot0001* Network Boot-IPV4: 00-0E-C6-E0-22-F9
Boot0002* Network Boot-IPV6: 00-0E-C6-E0-22-F9
Boot0003* Windows Boot Manager
Boot0004* KINGSTON RBU-SNS8100S360GD      
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Setze EFI Bootreihenfolge auf Lokal,Netzwerk: 0000,2003.
BootNext: 0003
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0000,2003
Boot0000* grub
Boot0001* Network Boot-IPV4: 00-0E-C6-E0-22-F9
Boot0002* Network Boot-IPV6: 00-0E-C6-E0-22-F9
Boot0003* Windows Boot Manager
Boot0004* KINGSTON RBU-SNS8100S360GD      
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Installiere GRUB in MBR/EFI von /dev/sda ... Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
OK!
## Log session end: Thu Jul 28 18:07:49 CEST 2016 ##
## Log session begin: Fri Jul 22 12:36:27 CEST 2016 ##
## Hardware-Setup - Begin ##
Initializing cgroup subsys cpu
Linux version 4.2.0 (root@proxy) (gcc version 4.8.4 (Ubuntu 
4.8.4-2ubuntu1~14.04.1) ) #1 SMP Fri Mar 18 17:51:45 CET 2016
Command line: BOOT_IMAGE=/linbo64 quiet splash localboot
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 
'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000965affff] usable
BIOS-e820: [mem 0x00000000965b0000-0x0000000096eaffff] reserved
BIOS-e820: [mem 0x0000000096eb0000-0x000000009b6befff] usable
BIOS-e820: [mem 0x000000009b6bf000-0x000000009b8befff] type 20
BIOS-e820: [mem 0x000000009b8bf000-0x000000009bebefff] reserved
BIOS-e820: [mem 0x000000009bebf000-0x000000009bfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009bfbf000-0x000000009bffefff] ACPI data
BIOS-e820: [mem 0x000000009bfff000-0x000000009bffffff] usable
BIOS-e820: [mem 0x000000009c000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi:  ACPI=0x9bffe000  ACPI 2.0=0x9bffe014  SMBIOS=0x9bebef98 
SMBIOS 2.8 present.
DMI: Acer Aspire SW5-171P/Longchamp_S, BIOS V1.04 11/7/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-combining
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 0080000000 mask 7FE0000000 write-back
  2 base 009C000000 mask 7FFC000000 uncachable
  3 base 00FFB00000 mask 7FFFF00000 write-protect
  4 base 00FFC00000 mask 7FFFC00000 write-protect
  5 base 0100000000 mask 7F80000000 write-back
  6 base 015F600000 mask 7FFFE00000 uncachable
  7 base 015F800000 mask 7FFF800000 uncachable
  8 base 0160000000 mask 7FE0000000 uncachable
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x9c000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000007e000] 7e000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x018e3000, 0x018e3fff] PGTABLE
BRK [0x018e4000, 0x018e4fff] PGTABLE
BRK [0x018e5000, 0x018e5fff] PGTABLE
init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
 [mem 0x15f400000-0x15f5fffff] page 2M
BRK [0x018e6000, 0x018e6fff] PGTABLE
init_memory_mapping: [mem 0x140000000-0x15f3fffff]
 [mem 0x140000000-0x15f3fffff] page 2M
init_memory_mapping: [mem 0x120000000-0x13fffffff]
 [mem 0x120000000-0x13fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x965affff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x963fffff] page 2M
 [mem 0x96400000-0x965affff] page 4k
init_memory_mapping: [mem 0x96eb0000-0x9b6befff]
 [mem 0x96eb0000-0x96ffffff] page 4k
 [mem 0x97000000-0x9b5fffff] page 2M
 [mem 0x9b600000-0x9b6befff] page 4k
BRK [0x018e7000, 0x018e7fff] PGTABLE
BRK [0x018e8000, 0x018e8fff] PGTABLE
init_memory_mapping: [mem 0x9bfff000-0x9bffffff]
 [mem 0x9bfff000-0x9bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 1G
RAMDISK: [mem 0x35eba000-0x36f54fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009BFFE014 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000009BFFE210 0000CC (v01 ACRSYS ACRPRDCT 00000001      
01000013)
ACPI: FACP 0x000000009BFF2000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: DSDT 0x000000009BFD6000 0182EE (v02 ACRSYS ACRPRDCT 00000000 1025 
00040000)
ACPI: FACS 0x000000009BFAE000 000040
ACPI: ECDT 0x000000009BFFD000 0000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: UEFI 0x000000009BFFC000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFF7000 00497A (v01 ACRSYS ACRPRDCT 00001000 1025 
00040000)
ACPI: FPDT 0x000000009BFF5000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: MSDM 0x000000009BFF4000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: ASF! 0x000000009BFF3000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: HPET 0x000000009BFF1000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: APIC 0x000000009BFF0000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: MCFG 0x000000009BFEF000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SLIC 0x000000009BFD5000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFD4000 0008BB (v01 ACRSYS ACRPRDCT 00001000 1025 
00040000)
ACPI: BOOT 0x000000009BFD2000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: LPIT 0x000000009BFD1000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 
00040000)
ACPI: ASPT 0x000000009BFD0000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: DBGP 0x000000009BFCF000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFCC000 000494 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: SSDT 0x000000009BFCB000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: SSDT 0x000000009BFC7000 0034D9 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: CSRT 0x000000009BFC5000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: BGRT 0x000000009BFC6000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015ac00000-ffff88015e5fffff] 
on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000015f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000006efff]
  node   0: [mem 0x0000000000070000-0x0000000000087fff]
  node   0: [mem 0x0000000000100000-0x00000000965affff]
  node   0: [mem 0x0000000096eb0000-0x000000009b6befff]
  node   0: [mem 0x000000009bfff000-0x000000009bffffff]
  node   0: [mem 0x0000000100000000-0x000000015f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
On node 0 totalpages: 1024838
  DMA zone: 56 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3974 pages, LIFO batch:0
  DMA32 zone: 8617 pages used for memmap
  DMA32 zone: 630208 pages, LIFO batch:31
  Normal zone: 5341 pages used for memmap
  Normal zone: 390656 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82712 r8192 d31976 u262144
pcpu-alloc: s82712 r8192 d31976 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1010802
Kernel command line: BOOT_IMAGE=/linbo64 quiet splash localboot
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 28672 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 65536 bytes
early log buf free: 21404(65%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3861736K/4099352K available (5479K kernel code, 411K rwdata, 1880K 
rodata, 852K init, 432K bss, 237616K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 64.
NR_IRQS:4352 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 
133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.654 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 
2993.30 BogoMIPS (lpj=14966540)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff8186f000 - ffffffff81876000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-4012Y CPU @ 1.50GHz (fam: 06, model: 45, 
stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width 
counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11973.23 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9bebf000-0x9bfbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 
19112604462750000 ns
xor: automatically using best checksumming function:
   avx       : 19395.600 MB/sec
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1   gen()  4335 MB/s
raid6: sse2x1   xor()  2967 MB/s
raid6: sse2x2   gen()  5602 MB/s
raid6: sse2x2   xor()  3747 MB/s
raid6: sse2x4   gen()  6656 MB/s
raid6: sse2x4   xor()  4573 MB/s
raid6: avx2x1   gen()  8510 MB/s
raid6: avx2x2   gen() 10067 MB/s
raid6: avx2x4   gen() 11783 MB/s
raid6: using algorithm avx2x4 gen() 11783 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015AA1A000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 
20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015AB66800 0005AA (v01 PmRef  ApIst    00003000 INTL 
20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015AA1C200 000119 (v01 PmRef  ApCst    00003000 INTL 
20131115)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] 
(20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20150619/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and 
report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig 
ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb0518000-0xb051bfff 64bit]
pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb0510000-0xb0517fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb0520000-0xb052001f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb051c000-0xb051ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb0524000-0xb05243ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb0523000-0xb05237ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0521000-0xb05210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xb0522000-0xb0522fff 64bit]
pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xb0400000-0xb047ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x38, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x965b0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9b6bf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] could not be reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:04: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 
2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no 
compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xb0480000-0xb048ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xb0400000-0xb04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17004K (ffff880035eba000 - ffff880036f55000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8fec0000-0x93ec0000] (64MB) mapped at 
[ffff88008fec0000-ffff880093ebffff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl 
timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter 
Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
efifb: probing for efifb
efifb: framebuffer at 0xa0000000, mapped to 0xffffc90000800000, using 8128k, 
total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
checking generic (a0000000 7f0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
ACPI: Deprecated procfs I/F for AC is loaded, please retry with 
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (50 C)
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.5.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <bec...@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.4.2.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver idmouse
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please 
boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
NET: Registered protocol family 15
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
Btrfs loaded
input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input4
ACPI: Deprecated procfs I/F for battery is loaded, please retry with 
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 852K (ffffffff8179a000 - ffffffff8186f000)
systemd-udevd[921]: starting version 204
udevd[921]: GOTO 'libgphoto2_usb_end' has no matching label in: 
'/lib/udev/rules.d/40-libgphoto2-6.rules'
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-acpi INT33C6:00: No vmmc regulator found
sdhci-acpi INT33C6:00: No vqmmc regulator found
mmc0: SDHCI controller on ACPI [INT33C6:00] using ADMA
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0524000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x9 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso 
sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523280 irq 41
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON RBU-SNS8100S360GD, S8FM06.9, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON RBU-SNS 06.9 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-3: new high-speed USB device number 3 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
## Hardware-Setup - End ##
Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file 
or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Stelle Windows-Bootdateien auf EFI-Partition wieder her.
Stelle EFI-Standardboot wieder her.
BootNext: 0003
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,0003,2001,2002,2003
Boot0000* Network Boot-IPV4: 00-0E-C6-E0-22-F9
Boot0001* Network Boot-IPV6: 00-0E-C6-E0-22-F9
Boot0002* grub
Boot0003* Windows Boot Manager
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Setze EFI Bootreihenfolge auf Lokal,Netzwerk: 0002,2003.
BootNext: 0003
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,2003
Boot0000* Network Boot-IPV4: 00-0E-C6-E0-22-F9
Boot0001* Network Boot-IPV6: 00-0E-C6-E0-22-F9
Boot0002* grub
Boot0003* Windows Boot Manager
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Installiere Grub in MBR/EFI von /dev/sda ... Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file 
or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
OK!
## Log session end: Fri Jul 22 12:36:27 CEST 2016 ##
## Log session begin: Fri Jul 22 12:38:30 CEST 2016 ##
## Hardware-Setup - Begin ##
Initializing cgroup subsys cpu
Linux version 4.2.0 (root@proxy) (gcc version 4.8.4 (Ubuntu 
4.8.4-2ubuntu1~14.04.1) ) #1 SMP Fri Mar 18 17:51:45 CET 2016
Command line: BOOT_IMAGE=/linbo64 quiet splash localboot
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 
'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000965affff] usable
BIOS-e820: [mem 0x00000000965b0000-0x0000000096eaffff] reserved
BIOS-e820: [mem 0x0000000096eb0000-0x000000009b6befff] usable
BIOS-e820: [mem 0x000000009b6bf000-0x000000009b8befff] type 20
BIOS-e820: [mem 0x000000009b8bf000-0x000000009bebefff] reserved
BIOS-e820: [mem 0x000000009bebf000-0x000000009bfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009bfbf000-0x000000009bffefff] ACPI data
BIOS-e820: [mem 0x000000009bfff000-0x000000009bffffff] usable
BIOS-e820: [mem 0x000000009c000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi:  ACPI=0x9bffe000  ACPI 2.0=0x9bffe014  SMBIOS=0x9bebef98 
SMBIOS 2.8 present.
DMI: Acer Aspire SW5-171P/Longchamp_S, BIOS V1.04 11/7/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-combining
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 0080000000 mask 7FE0000000 write-back
  2 base 009C000000 mask 7FFC000000 uncachable
  3 base 00FFB00000 mask 7FFFF00000 write-protect
  4 base 00FFC00000 mask 7FFFC00000 write-protect
  5 base 0100000000 mask 7F80000000 write-back
  6 base 015F600000 mask 7FFFE00000 uncachable
  7 base 015F800000 mask 7FFF800000 uncachable
  8 base 0160000000 mask 7FE0000000 uncachable
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x9c000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000007e000] 7e000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x018e3000, 0x018e3fff] PGTABLE
BRK [0x018e4000, 0x018e4fff] PGTABLE
BRK [0x018e5000, 0x018e5fff] PGTABLE
init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
 [mem 0x15f400000-0x15f5fffff] page 2M
BRK [0x018e6000, 0x018e6fff] PGTABLE
init_memory_mapping: [mem 0x140000000-0x15f3fffff]
 [mem 0x140000000-0x15f3fffff] page 2M
init_memory_mapping: [mem 0x120000000-0x13fffffff]
 [mem 0x120000000-0x13fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x965affff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x963fffff] page 2M
 [mem 0x96400000-0x965affff] page 4k
init_memory_mapping: [mem 0x96eb0000-0x9b6befff]
 [mem 0x96eb0000-0x96ffffff] page 4k
 [mem 0x97000000-0x9b5fffff] page 2M
 [mem 0x9b600000-0x9b6befff] page 4k
BRK [0x018e7000, 0x018e7fff] PGTABLE
BRK [0x018e8000, 0x018e8fff] PGTABLE
init_memory_mapping: [mem 0x9bfff000-0x9bffffff]
 [mem 0x9bfff000-0x9bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 1G
RAMDISK: [mem 0x35eba000-0x36f54fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009BFFE014 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000009BFFE210 0000CC (v01 ACRSYS ACRPRDCT 00000001      
01000013)
ACPI: FACP 0x000000009BFF2000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: DSDT 0x000000009BFD6000 0182EE (v02 ACRSYS ACRPRDCT 00000000 1025 
00040000)
ACPI: FACS 0x000000009BFAE000 000040
ACPI: ECDT 0x000000009BFFD000 0000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: UEFI 0x000000009BFFC000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFF7000 00497A (v01 ACRSYS ACRPRDCT 00001000 1025 
00040000)
ACPI: FPDT 0x000000009BFF5000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: MSDM 0x000000009BFF4000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: ASF! 0x000000009BFF3000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: HPET 0x000000009BFF1000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: APIC 0x000000009BFF0000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: MCFG 0x000000009BFEF000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SLIC 0x000000009BFD5000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFD4000 0008BB (v01 ACRSYS ACRPRDCT 00001000 1025 
00040000)
ACPI: BOOT 0x000000009BFD2000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: LPIT 0x000000009BFD1000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 
00040000)
ACPI: ASPT 0x000000009BFD0000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: DBGP 0x000000009BFCF000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFCC000 000494 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: SSDT 0x000000009BFCB000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: SSDT 0x000000009BFC7000 0034D9 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: CSRT 0x000000009BFC5000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: BGRT 0x000000009BFC6000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015ac00000-ffff88015e5fffff] 
on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000015f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000006efff]
  node   0: [mem 0x0000000000070000-0x0000000000087fff]
  node   0: [mem 0x0000000000100000-0x00000000965affff]
  node   0: [mem 0x0000000096eb0000-0x000000009b6befff]
  node   0: [mem 0x000000009bfff000-0x000000009bffffff]
  node   0: [mem 0x0000000100000000-0x000000015f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
On node 0 totalpages: 1024838
  DMA zone: 56 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3974 pages, LIFO batch:0
  DMA32 zone: 8617 pages used for memmap
  DMA32 zone: 630208 pages, LIFO batch:31
  Normal zone: 5341 pages used for memmap
  Normal zone: 390656 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82712 r8192 d31976 u262144
pcpu-alloc: s82712 r8192 d31976 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1010802
Kernel command line: BOOT_IMAGE=/linbo64 quiet splash localboot
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 28672 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 65536 bytes
early log buf free: 21404(65%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3861736K/4099352K available (5479K kernel code, 411K rwdata, 1880K 
rodata, 852K init, 432K bss, 237616K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 64.
NR_IRQS:4352 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 
133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.652 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 
2993.30 BogoMIPS (lpj=14966520)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff8186f000 - ffffffff81876000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-4012Y CPU @ 1.50GHz (fam: 06, model: 45, 
stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width 
counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11973.21 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9bebf000-0x9bfbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 
19112604462750000 ns
xor: automatically using best checksumming function:
   avx       : 19395.600 MB/sec
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1   gen()  4332 MB/s
raid6: sse2x1   xor()  2967 MB/s
raid6: sse2x2   gen()  5596 MB/s
raid6: sse2x2   xor()  3746 MB/s
raid6: sse2x4   gen()  6650 MB/s
raid6: sse2x4   xor()  4518 MB/s
raid6: avx2x1   gen()  8507 MB/s
raid6: avx2x2   gen() 10057 MB/s
raid6: avx2x4   gen() 11762 MB/s
raid6: using algorithm avx2x4 gen() 11762 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015A203000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 
20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015A829800 0005AA (v01 PmRef  ApIst    00003000 INTL 
20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015A125800 000119 (v01 PmRef  ApCst    00003000 INTL 
20131115)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] 
(20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20150619/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and 
report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig 
ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb0518000-0xb051bfff 64bit]
pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb0510000-0xb0517fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb0520000-0xb052001f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb051c000-0xb051ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb0524000-0xb05243ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb0523000-0xb05237ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0521000-0xb05210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xb0522000-0xb0522fff 64bit]
pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xb0400000-0xb047ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x38, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x965b0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9b6bf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] could not be reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:04: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 
2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no 
compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xb0480000-0xb048ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xb0400000-0xb04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17004K (ffff880035eba000 - ffff880036f55000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8fec0000-0x93ec0000] (64MB) mapped at 
[ffff88008fec0000-ffff880093ebffff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl 
timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter 
Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
efifb: probing for efifb
efifb: framebuffer at 0xa0000000, mapped to 0xffffc90000800000, using 8128k, 
total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
checking generic (a0000000 7f0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
ACPI: Deprecated procfs I/F for AC is loaded, please retry with 
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (49 C)
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.5.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <bec...@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.4.2.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver idmouse
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please 
boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
ACPI: Deprecated procfs I/F for battery is loaded, please retry with 
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
NET: Registered protocol family 15
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
Btrfs loaded
input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input4
Freeing unused kernel memory: 852K (ffffffff8179a000 - ffffffff8186f000)
systemd-udevd[920]: starting version 204
udevd[920]: GOTO 'libgphoto2_usb_end' has no matching label in: 
'/lib/udev/rules.d/40-libgphoto2-6.rules'
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-acpi INT33C6:00: No vmmc regulator found
sdhci-acpi INT33C6:00: No vqmmc regulator found
mmc0: SDHCI controller on ACPI [INT33C6:00] using ADMA
xhci_hcd 0000:00:14.0: xHCI Host Controller
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
ehci-pci: EHCI PCI platform driver
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0524000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x9 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso 
sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523280 irq 41
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON RBU-SNS8100S360GD, S8FM06.9, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON RBU-SNS 06.9 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-3: new high-speed USB device number 3 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
## Hardware-Setup - End ##
Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file 
or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
## Log session end: Fri Jul 22 12:38:30 CEST 2016 ##
## Log session begin: Fri Jul 22 12:43:31 CEST 2016 ##
Cluster size has been automatically set to 4096 bytes.
Creating NTFS volume structures.
mkntfs completed successfully. Have a nice day.
1+0 records in
1+0 records out
8 bytes (8B) copied, 0.000220 seconds, 35.5KB/s
## Log session end: Fri Jul 22 12:43:31 CEST 2016 ##
## Log session begin: Fri Jul 22 12:43:34 CEST 2016 ##
Stelle Windows-Bootdateien auf EFI-Partition wieder her.
Stelle EFI-Standardboot wieder her.
BootNext: 0003
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,0003,2001,2002,2003
Boot0000* Network Boot-IPV4: 00-0E-C6-E0-22-F9
Boot0001* Network Boot-IPV6: 00-0E-C6-E0-22-F9
Boot0002* grub
Boot0003* Windows Boot Manager
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Setze EFI Bootreihenfolge auf Lokal,Netzwerk: 0002,2003.
BootNext: 0003
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,2003
Boot0000* Network Boot-IPV4: 00-0E-C6-E0-22-F9
Boot0001* Network Boot-IPV6: 00-0E-C6-E0-22-F9
Boot0002* grub
Boot0003* Windows Boot Manager
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Installiere Grub in MBR/EFI von /dev/sda ... Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file 
or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
OK!
## Log session end: Fri Jul 22 12:43:34 CEST 2016 ##
## Log session begin: Fri Jul 22 13:09:19 CEST 2016 ##
## Hardware-Setup - Begin ##
Initializing cgroup subsys cpu
Linux version 4.2.0 (root@proxy) (gcc version 4.8.4 (Ubuntu 
4.8.4-2ubuntu1~14.04.1) ) #1 SMP Fri Mar 18 17:51:45 CET 2016
Command line: BOOT_IMAGE=/linbo64 quiet splash localboot
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 
'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000965affff] usable
BIOS-e820: [mem 0x00000000965b0000-0x0000000096eaffff] reserved
BIOS-e820: [mem 0x0000000096eb0000-0x000000009b6befff] usable
BIOS-e820: [mem 0x000000009b6bf000-0x000000009b8befff] type 20
BIOS-e820: [mem 0x000000009b8bf000-0x000000009bebefff] reserved
BIOS-e820: [mem 0x000000009bebf000-0x000000009bfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009bfbf000-0x000000009bffefff] ACPI data
BIOS-e820: [mem 0x000000009bfff000-0x000000009bffffff] usable
BIOS-e820: [mem 0x000000009c000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi:  ACPI=0x9bffe000  ACPI 2.0=0x9bffe014  SMBIOS=0x9bebef98 
SMBIOS 2.8 present.
DMI: Acer Aspire SW5-171P/Longchamp_S, BIOS V1.04 11/7/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-E7FFF write-protect
  E8000-EFFFF write-combining
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 0080000000 mask 7FE0000000 write-back
  2 base 009C000000 mask 7FFC000000 uncachable
  3 base 00FFB00000 mask 7FFFF00000 write-protect
  4 base 00FFC00000 mask 7FFFC00000 write-protect
  5 base 0100000000 mask 7F80000000 write-back
  6 base 015F600000 mask 7FFFE00000 uncachable
  7 base 015F800000 mask 7FFF800000 uncachable
  8 base 0160000000 mask 7FE0000000 uncachable
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x9c000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000007e000] 7e000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x018e3000, 0x018e3fff] PGTABLE
BRK [0x018e4000, 0x018e4fff] PGTABLE
BRK [0x018e5000, 0x018e5fff] PGTABLE
init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
 [mem 0x15f400000-0x15f5fffff] page 2M
BRK [0x018e6000, 0x018e6fff] PGTABLE
init_memory_mapping: [mem 0x140000000-0x15f3fffff]
 [mem 0x140000000-0x15f3fffff] page 2M
init_memory_mapping: [mem 0x120000000-0x13fffffff]
 [mem 0x120000000-0x13fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x965affff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x963fffff] page 2M
 [mem 0x96400000-0x965affff] page 4k
init_memory_mapping: [mem 0x96eb0000-0x9b6befff]
 [mem 0x96eb0000-0x96ffffff] page 4k
 [mem 0x97000000-0x9b5fffff] page 2M
 [mem 0x9b600000-0x9b6befff] page 4k
BRK [0x018e7000, 0x018e7fff] PGTABLE
BRK [0x018e8000, 0x018e8fff] PGTABLE
init_memory_mapping: [mem 0x9bfff000-0x9bffffff]
 [mem 0x9bfff000-0x9bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 1G
RAMDISK: [mem 0x35eba000-0x36f54fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009BFFE014 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000009BFFE210 0000E4 (v01 ACRSYS ACRPRDCT 00000001      
01000013)
ACPI: FACP 0x000000009BFEF000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: DSDT 0x000000009BFD3000 0182EE (v02 ACRSYS ACRPRDCT 00000000 1025 
00040000)
ACPI: FACS 0x000000009BF9D000 000040
ACPI: ECDT 0x000000009BFFD000 0000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: UEFI 0x000000009BFFC000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFF7000 00497A (v01 ACRSYS ACRPRDCT 00001000 1025 
00040000)
ACPI: FPDT 0x000000009BFF5000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: MSDM 0x000000009BFF4000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFF3000 000496 (v01 ACRSYS ACRPRDCT 00001000 1025 
00040000)
ACPI: SSDT 0x000000009BFF2000 00004A (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: TPM2 0x000000009BFF1000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 
00040000)
ACPI: ASF! 0x000000009BFF0000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: HPET 0x000000009BFEE000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: APIC 0x000000009BFED000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: MCFG 0x000000009BFEC000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SLIC 0x000000009BFD2000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFD1000 0008BB (v01 ACRSYS ACRPRDCT 00001000 1025 
00040000)
ACPI: BOOT 0x000000009BFCF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: LPIT 0x000000009BFCE000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 
00040000)
ACPI: ASPT 0x000000009BFCD000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: DBGP 0x000000009BFCC000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: SSDT 0x000000009BFC9000 000494 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: SSDT 0x000000009BFC8000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: SSDT 0x000000009BFC4000 0034D9 (v01 ACRSYS ACRPRDCT 00003000 1025 
00040000)
ACPI: CSRT 0x000000009BFC2000 0000C4 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: BGRT 0x000000009BFC3000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 
00040000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015ac00000-ffff88015e5fffff] 
on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000015f5fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000006efff]
  node   0: [mem 0x0000000000070000-0x0000000000087fff]
  node   0: [mem 0x0000000000100000-0x00000000965affff]
  node   0: [mem 0x0000000096eb0000-0x000000009b6befff]
  node   0: [mem 0x000000009bfff000-0x000000009bffffff]
  node   0: [mem 0x0000000100000000-0x000000015f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000015f5fffff]
On node 0 totalpages: 1024838
  DMA zone: 56 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3974 pages, LIFO batch:0
  DMA32 zone: 8617 pages used for memmap
  DMA32 zone: 630208 pages, LIFO batch:31
  Normal zone: 5341 pages used for memmap
  Normal zone: 390656 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88015f200000 s82712 r8192 d31976 u262144
pcpu-alloc: s82712 r8192 d31976 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1010802
Kernel command line: BOOT_IMAGE=/linbo64 quiet splash localboot
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 28672 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 65536 bytes
early log buf free: 21104(64%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3861980K/4099352K available (5479K kernel code, 411K rwdata, 1880K 
rodata, 852K init, 432K bss, 237372K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 64.
NR_IRQS:4352 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 
133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.596 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 
2993.19 BogoMIPS (lpj=14965960)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff8186f000 - ffffffff81876000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-4012Y CPU @ 1.50GHz (fam: 06, model: 45, 
stepping: 01)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width 
counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11972.76 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9bebf000-0x9bfbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 
19112604462750000 ns
xor: automatically using best checksumming function:
   avx       : 19394.800 MB/sec
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1   gen()  4335 MB/s
raid6: sse2x1   xor()  2967 MB/s
raid6: sse2x2   gen()  5602 MB/s
raid6: sse2x2   xor()  3747 MB/s
raid6: sse2x4   gen()  6656 MB/s
raid6: sse2x4   xor()  4573 MB/s
raid6: avx2x1   gen()  8512 MB/s
raid6: avx2x2   gen() 10068 MB/s
raid6: avx2x4   gen() 11782 MB/s
raid6: using algorithm avx2x4 gen() 11782 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015AA3C000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 
20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015A829800 0005AA (v01 PmRef  ApIst    00003000 INTL 
20131115)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88015AA3E200 000119 (v01 PmRef  ApCst    00003000 INTL 
20131115)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] 
(20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] 
(20150619/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and 
report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig 
ASPM ClockPM MSI]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a1e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb0518000-0xb051bfff 64bit]
pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb0510000-0xb0517fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb0520000-0xb052001f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb051c000-0xb051ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb0524000-0xb05243ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb0523000-0xb05237ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0521000-0xb05210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xb0522000-0xb0522fff 64bit]
pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xb0400000-0xb047ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x38, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x965b0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9b6bf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] could not be reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:04: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:04: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:05: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:05: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:05: [mem 0xfe111000-0xfe111007] has been reserved
system 00:05: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 
2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no 
compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xb0480000-0xb048ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xb0400000-0xb04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17004K (ffff880035eba000 - ffff880036f55000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8fec0000-0x93ec0000] (64MB) mapped at 
[ffff88008fec0000-ffff880093ebffff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl 
timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter 
Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
efifb: probing for efifb
efifb: framebuffer at 0xa0000000, mapped to 0xffffc90000800000, using 8128k, 
total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
checking generic (a0000000 7f0000) vs hw (a0000 10000)
fb1: VGA16 VGA frame buffer device
ACPI: Deprecated procfs I/F for AC is loaded, please retry with 
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (50 C)
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
VMware PVSCSI driver - version 1.0.5.0-k
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
v1.01-e (2.4 port) Sep-11-2006  Donald Becker <bec...@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
VMware vmxnet3 virtual NIC driver - version 1.4.2.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
usbcore: registered new interface driver idmouse
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please 
boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input4
ACPI: Deprecated procfs I/F for battery is loaded, please retry with 
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
NET: Registered protocol family 15
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
Btrfs loaded
Freeing unused kernel memory: 852K (ffffffff8179a000 - ffffffff8186f000)
systemd-udevd[925]: starting version 204
udevd[925]: GOTO 'libgphoto2_usb_end' has no matching label in: 
'/lib/udev/rules.d/40-libgphoto2-6.rules'
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-acpi INT33C6:00: No vmmc regulator found
sdhci-acpi INT33C6:00: No vqmmc regulator found
mmc0: SDHCI controller on ACPI [INT33C6:00] using ADMA
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
libata version 3.00 loaded.
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0524000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x9 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso 
sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523280 irq 41
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: KINGSTON RBU-SNS8100S360GD, S8FM06.9, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON RBU-SNS 06.9 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support 
DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-3: new high-speed USB device number 3 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
## Hardware-Setup - End ##
Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file 
or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
NTFS signature is missing.
Failed to mount '/dev/sda': Invalid argument
The device '/dev/sda' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
Stelle Windows-Bootdateien auf EFI-Partition wieder her.
Stelle EFI-Standardboot wieder her.
BootNext: 0003
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0000,0003,2001,2002,2003
Boot0000* grub
Boot0003* Windows Boot Manager
Boot0004* KINGSTON RBU-SNS8100S360GD      
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Setze EFI Bootreihenfolge auf Lokal,Netzwerk: 0000,2003.
BootNext: 0003
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0000,2003
Boot0000* grub
Boot0003* Windows Boot Manager
Boot0004* KINGSTON RBU-SNS8100S360GD      
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
Installiere Grub in MBR/EFI von /dev/sda ... Installing for x86_64-efi platform.
/proc/devices: No entry for device-mapper found
grub-install: warning: cannot open directory `/usr/share/locale': No such file 
or directory.
/proc/devices: No entry for device-mapper found
/proc/devices: No entry for device-mapper found
Installation finished. No error reported.
OK!
## Log session end: Fri Jul 22 13:09:19 CEST 2016 ##
_______________________________________________
linuxmuster-user mailing list
linuxmuster-user@lists.linuxmuster.net
https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user

Antwort per Email an