This patch adds the clrsetbits() macro, which is used to set and clear multiple bits in a single read-modify-write operation. Specify the bits to clear in the 'clear' parameter and the bits to set in the 'set' parameter. These macros can also be used to set a multiple-bit bit pattern using a mask, by specifying the mask in the 'clear' parameter and the new bit pattern in the 'set' parameter. The 'type' parameter is used to specify the size and endian.
Signed-off-by: Timur Tabi <[EMAIL PROTECTED]> --- Replace multiple macros with a single one that uses macro concatenation to handle the endian/size. include/asm-powerpc/io.h | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 4c0b550..030ed4e 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -737,6 +737,19 @@ static inline void * bus_to_virt(unsigned long address) #define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) #define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) +/* Clear and set bits in one shot. This macrocan be used to clear and set + * multiple bits in a register using a single read-modify-write. It can + * also be used to set a multiple-bit bit pattern using a mask, by + * specifying the mask in the 'clear' parameter and the new bit pattern in + * the 'set' parameter. + * + * For 'type', specify 8, le16, be16, le32, be32, le64, or be64. The latter + * two only work on 64-bit PowerPC (__powerpc64__ is defined). + */ + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_IO_H */ -- 1.5.2.4 _______________________________________________ Linuxppc-dev mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-dev
