This patch enables NEW EMAC support for PowerPC 440EPx Sequoia board
and adds BCM5248 and Marvell 88E1111 PHY support to NEW EMAC driver.
These PHY chips are used on PowerPC440EPx boards.
The PHY code is based on the previous work by Stefan Roese <[EMAIL PROTECTED]>

Signed-off-by: Stefan Roese <[EMAIL PROTECTED]>
Signed-off-by: Valentine Barshak <[EMAIL PROTECTED]>

---
 arch/powerpc/platforms/44x/Kconfig |    7 ++----
 drivers/net/ibm_newemac/phy.c      |   39 +++++++++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+), 4 deletions(-)

--- linux.orig/arch/powerpc/platforms/44x/Kconfig       2007-07-30 
15:05:50.000000000 +0400
+++ linux/arch/powerpc/platforms/44x/Kconfig    2007-07-30 17:59:05.000000000 
+0400
@@ -48,10 +48,9 @@
 config 440EPX
        bool
        select PPC_FPU
-# Disabled until the new EMAC Driver is merged.
-#      select IBM_NEW_EMAC_EMAC4
-#      select IBM_NEW_EMAC_RGMII
-#      select IBM_NEW_EMAC_ZMII
+       select IBM_NEW_EMAC_EMAC4
+       select IBM_NEW_EMAC_RGMII
+       select IBM_NEW_EMAC_ZMII
 
 config 440GP
        bool
--- linux.orig/drivers/net/ibm_newemac/phy.c    2007-06-15 21:45:18.000000000 
+0400
+++ linux/drivers/net/ibm_newemac/phy.c 2007-06-15 20:45:15.000000000 +0400
@@ -306,8 +306,47 @@
        .ops            = &cis8201_phy_ops
 };
 
+static struct mii_phy_def bcm5248_phy_def = {
+
+       .phy_id         = 0x0143bc00,
+       .phy_id_mask    = 0x0ffffff0,
+       .name           = "BCM5248 10/100 SMII Ethernet",
+       .ops            = &generic_phy_ops
+};
+
+static int m88e1111_init(struct mii_phy *phy)
+{
+       printk("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
+       phy_write(phy, 0x14, 0x0ce3);
+       phy_write(phy, 0x18, 0x4101);
+       phy_write(phy, 0x09, 0x0e00);
+       phy_write(phy, 0x04, 0x01e1);
+       phy_write(phy, 0x00, 0x9140);
+       phy_write(phy, 0x00, 0x1140);
+
+       return  0;
+}
+
+static struct mii_phy_ops m88e1111_phy_ops = {
+       .init           = m88e1111_init,
+       .setup_aneg     = genmii_setup_aneg,
+       .setup_forced   = genmii_setup_forced,
+       .poll_link      = genmii_poll_link,
+       .read_link      = genmii_read_link
+};
+
+static struct mii_phy_def m88e1111_phy_def = {
+
+       .phy_id         = 0x01410CC0,
+       .phy_id_mask    = 0x0ffffff0,
+       .name           = "Marvell 88E1111 Ethernet",
+       .ops            = &m88e1111_phy_ops,
+};
+
 static struct mii_phy_def *mii_phy_table[] = {
        &cis8201_phy_def,
+       &bcm5248_phy_def,
+       &m88e1111_phy_def,
        &genmii_phy_def,
        NULL
 };
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to