On Thursday 08 November 2007, Benjamin Herrenschmidt wrote: > With some PHYs, when the link goes away, the EMAC reset fails due > to the loss of the RX clock I believe. > > The old EMAC driver worked around that using some internal chip-specific > clock force bits that are different on various 44x implementations. > > This is an attempt at doing it differently, by avoiding the reset when > there is no link, but forcing loopback mode instead. It seems to work > on my Taishan 440GX based board so far. > > Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
Acked-by: Stefan Roese <[EMAIL PROTECTED]> Best regards, Stefan _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
