On Mon, 2007-11-12 at 18:54 -0800, Siva Prasad wrote: > Hi, > > I am using 2.6.19 Linux on 8641D based system. > > I am using early printk's and it works fine until console_init() is > executed. After that it does not, as the early printk's get disabled, > which is fine. However, I don't see any prints after that at all, that > are based on regular printk statements. I looked directly into the > memory at __log_buf and found all the print messages. It is just not > coming out to the serial port properly. > > It would be great if some one can tell me various parameters that I need > to consider changing, to successfully port the serial driver for a new > board. > > Based on the early printk's, I am getting the following messages...
You can use udbg-immortal to force the udbg early printk to stay around, and then use printk to see what's going on with your serial driver. Ben. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
