From: "Manoj N. Kumar" <ma...@linux.vnet.ibm.com>
The calls to pci_request_regions(), pci_resource_start(),
pci_set_dma_mask(), pci_set_master() and pci_save_state() are all
unnecessary for the IBM CXL flash adapter since data buffers
are not required to be mapped to the device's memory.
The use of services such as pci_set_dma_mask() are problematic on
hypervisor managed systems as the IBM CXL flash adapter is operating
under a virtual PCI Host Bridge (virtual PHB) which does not support
these services.
cxlflash 0001:00:00.0: init_pci: Failed to set PCI DMA mask rc=-5
The resolution is to simplify init_pci(), to a point where it does the
bare minimum (pci_enable_device). Similarly, remove the call the
pci_release_regions() from cxlflash_remove().
Signed-off-by: Manoj N. Kumar <ma...@linux.vnet.ibm.com>
---
drivers/scsi/cxlflash/main.c | 54 +-------------------------------------------
1 file changed, 1 insertion(+), 53 deletions(-)
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index f6d90ce..3dbb9fa 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -767,7 +767,6 @@ static void cxlflash_remove(struct pci_dev *pdev)
cancel_work_sync(&cfg->work_q);
term_afu(cfg);
case INIT_STATE_PCI:
- pci_release_regions(cfg->dev);
pci_disable_device(pdev);
case INIT_STATE_NONE:
free_mem(cfg);
@@ -840,15 +839,6 @@ static int init_pci(struct cxlflash_cfg *cfg)
struct pci_dev *pdev = cfg->dev;
int rc = 0;
- cfg->cxlflash_regs_pci = pci_resource_start(pdev, 0);
- rc = pci_request_regions(pdev, CXLFLASH_NAME);
- if (rc < 0) {
- dev_err(&pdev->dev,
- "%s: Couldn't register memory range of registers\n",
- __func__);
- goto out;
- }
-
rc = pci_enable_device(pdev);
if (rc || pci_channel_offline(pdev)) {
if (pci_channel_offline(pdev)) {
@@ -860,55 +850,13 @@ static int init_pci(struct cxlflash_cfg *cfg)
dev_err(&pdev->dev, "%s: Cannot enable adapter\n",
__func__);
cxlflash_wait_for_pci_err_recovery(cfg);
- goto out_release_regions;
- }
- }
-
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- if (rc < 0) {
- dev_dbg(&pdev->dev, "%s: Failed to set 64 bit PCI DMA mask\n",
- __func__);
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- }
-
- if (rc < 0) {
- dev_err(&pdev->dev, "%s: Failed to set PCI DMA mask\n",
- __func__);
- goto out_disable;
- }
-
- pci_set_master(pdev);
-
- if (pci_channel_offline(pdev)) {
- cxlflash_wait_for_pci_err_recovery(cfg);
- if (pci_channel_offline(pdev)) {
- rc = -EIO;
- goto out_msi_disable;
+ goto out;
}
}
- rc = pci_save_state(pdev);
-
- if (rc != PCIBIOS_SUCCESSFUL) {
- dev_err(&pdev->dev, "%s: Failed to save PCI config space\n",
- __func__);
- rc = -EIO;
- goto cleanup_nolog;
- }
-
out:
pr_debug("%s: returning rc=%d\n", __func__, rc);
return rc;
-
-cleanup_nolog:
-out_msi_disable:
- cxlflash_wait_for_pci_err_recovery(cfg);
-out_disable:
- pci_disable_device(pdev);
-out_release_regions:
- pci_release_regions(pdev);
- goto out;
-
}
/**
--
2.1.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
