[PATCH v1 22/23] ata: sata_dwc_460ex: make debug messages neat

[Andy Shevchenko]

There is a duplication in the debug messages when accessing SCR registers.
Remove duplication to make the messages neat.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
 drivers/ata/sata_dwc_460ex.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 44dca8c..2d73cdf 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -414,16 +414,16 @@ static int sata_dwc_scr_read(struct ata_link *link, 
unsigned int scr, u32 *val)
        }
 
        *val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
-       dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
-               __func__, link->ap->print_id, scr, *val);
+       dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
+               link->ap->print_id, scr, *val);
 
        return 0;
 }
 
 static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
 {
-       dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
-               __func__, link->ap->print_id, scr, val);
+       dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
+               link->ap->print_id, scr, val);
        if (scr > SCR_NOTIFICATION) {
                dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
                         __func__, scr);
-- 
2.8.0.rc3

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev