pnv_powersave_common does common steps needed before entering idle
state and eventually changes MSR to MSR_IDLE and does rfid to
pnv_enter_arch207_idle_mode.

Move the updation of HSTATE_HWTHREAD_STATE to pnv_powersave_common
from pnv_enter_arch207_idle_mode and make it more generic by passing the
rfid address as a function parameter.

Reviewed-by: Gautham R. Shenoy <e...@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shre...@linux.vnet.ibm.com>
---
 - No changes since v4

Changes in v4:
==============
 - Moved renaming of power7_powersave_common to earlier patch

Changes in v3:
==============
 - Moved HSTATE_HWTHREAD_STATE updation to power_powersave_common

 arch/powerpc/kernel/idle_book3s.S | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/kernel/idle_book3s.S 
b/arch/powerpc/kernel/idle_book3s.S
index 34dbfc9..a8397e3 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -75,6 +75,8 @@ core_idle_lock_held:
  * To check IRQ_HAPPENED in r4
  *     0 - don't check
  *     1 - check
+ *
+ * Address to 'rfid' to in r5
  */
 _GLOBAL(pnv_powersave_common)
        /* Use r3 to pass state nap/sleep/winkle */
@@ -127,28 +129,28 @@ _GLOBAL(pnv_powersave_common)
        std     r9,_MSR(r1)
        std     r1,PACAR1(r13)
 
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+       /* Tell KVM we're entering idle */
+       li      r4,KVM_HWTHREAD_IN_NAP
+       stb     r4,HSTATE_HWTHREAD_STATE(r13)
+#endif
+
        /*
         * Go to real mode to do the nap, as required by the architecture.
         * Also, we need to be in real mode before setting hwthread_state,
         * because as soon as we do that, another thread can switch
         * the MMU context to the guest.
         */
-       LOAD_REG_IMMEDIATE(r5, MSR_IDLE)
+       LOAD_REG_IMMEDIATE(r7, MSR_IDLE)
        li      r6, MSR_RI
        andc    r6, r9, r6
-       LOAD_REG_ADDR(r7, pnv_enter_arch207_idle_mode)
        mtmsrd  r6, 1           /* clear RI before setting SRR0/1 */
-       mtspr   SPRN_SRR0, r7
-       mtspr   SPRN_SRR1, r5
+       mtspr   SPRN_SRR0, r5
+       mtspr   SPRN_SRR1, r7
        rfid
 
        .globl pnv_enter_arch207_idle_mode
 pnv_enter_arch207_idle_mode:
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-       /* Tell KVM we're napping */
-       li      r4,KVM_HWTHREAD_IN_NAP
-       stb     r4,HSTATE_HWTHREAD_STATE(r13)
-#endif
        stb     r3,PACA_THREAD_IDLE_STATE(r13)
        cmpwi   cr3,r3,PNV_THREAD_SLEEP
        bge     cr3,2f
@@ -243,18 +245,21 @@ _GLOBAL(power7_idle)
 _GLOBAL(power7_nap)
        mr      r4,r3
        li      r3,PNV_THREAD_NAP
+       LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
        b       pnv_powersave_common
        /* No return */
 
 _GLOBAL(power7_sleep)
        li      r3,PNV_THREAD_SLEEP
        li      r4,1
+       LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
        b       pnv_powersave_common
        /* No return */
 
 _GLOBAL(power7_winkle)
        li      r3,PNV_THREAD_WINKLE
        li      r4,1
+       LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
        b       pnv_powersave_common
        /* No return */
 
-- 
2.4.11

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to