On 07/18/2016 08:07 AM, Sahil Mehta wrote:
> Indexed-count add for memory hotplug guarantees that a contiguous block
> of <count> lmbs beginning at a specified <index> will be assigned (NOT
> that <count> lmbs will be added). Because of Qemu's per-DIMM memory
> management, the addition of a contiguous block of memory currently
> requires a series of individual calls. Indexed-count add reduces
> this series into a single call.
> 
> Signed-off-by: Sahil Mehta <sme...@linux.vnet.ibm.com>
> ---
> v2:   -remove potential memory leak when parsing command
>       -use u32s drc_index and count instead of u32 ic[]
>        in dlpar_memory
> 
>  arch/powerpc/include/asm/rtas.h                 |    2
>  arch/powerpc/platforms/pseries/dlpar.c          |   34 +++++++-
>  arch/powerpc/platforms/pseries/hotplug-memory.c |  100 
> +++++++++++++++++++++--
>  3 files changed, 124 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
> index 51400ba..f46b271 100644
> --- a/arch/powerpc/include/asm/rtas.h
> +++ b/arch/powerpc/include/asm/rtas.h
> @@ -307,6 +307,7 @@ struct pseries_hp_errorlog {
>       union {
>               __be32  drc_index;
>               __be32  drc_count;
> +             __be32  indexed_count[2];
>               char    drc_name[1];
>       } _drc_u;
>  };
> @@ -322,6 +323,7 @@ struct pseries_hp_errorlog {
>  #define PSERIES_HP_ELOG_ID_DRC_NAME  1
>  #define PSERIES_HP_ELOG_ID_DRC_INDEX 2
>  #define PSERIES_HP_ELOG_ID_DRC_COUNT 3
> +#define PSERIES_HP_ELOG_ID_IC                4

For consistency it would be nice if this had the same prefix, namely
PSERIES_HP_ELOG_ID_DRC_XXX, as the previous types. Otherwise, we need to
remember that indexed count is named slightly different.

-Tyrel

> 
>  struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log,
>                                             uint16_t section_id);
> diff --git a/arch/powerpc/platforms/pseries/dlpar.c 
> b/arch/powerpc/platforms/pseries/dlpar.c
> index 2b93ae8..2a6dc9e 100644
> --- a/arch/powerpc/platforms/pseries/dlpar.c
> +++ b/arch/powerpc/platforms/pseries/dlpar.c
> @@ -345,11 +345,17 @@ static int handle_dlpar_errorlog(struct 
> pseries_hp_errorlog *hp_elog)
>       switch (hp_elog->id_type) {
>       case PSERIES_HP_ELOG_ID_DRC_COUNT:
>               hp_elog->_drc_u.drc_count =
> -                                     be32_to_cpu(hp_elog->_drc_u.drc_count);
> +                             be32_to_cpu(hp_elog->_drc_u.drc_count);
>               break;
>       case PSERIES_HP_ELOG_ID_DRC_INDEX:
>               hp_elog->_drc_u.drc_index =
> -                                     be32_to_cpu(hp_elog->_drc_u.drc_index);
> +                             be32_to_cpu(hp_elog->_drc_u.drc_index);
> +             break;
> +     case PSERIES_HP_ELOG_ID_IC:
> +             hp_elog->_drc_u.indexed_count[0] =
> +                             be32_to_cpu(hp_elog->_drc_u.indexed_count[0]);
> +             hp_elog->_drc_u.indexed_count[1] =
> +                             be32_to_cpu(hp_elog->_drc_u.indexed_count[1]);
>       }
> 
>       switch (hp_elog->resource) {
> @@ -409,7 +415,29 @@ static ssize_t dlpar_store(struct class *class, struct 
> class_attribute *attr,
>               goto dlpar_store_out;
>       }
> 
> -     if (!strncmp(arg, "index", 5)) {
> +     if (!strncmp(arg, "indexed-count", 13)) {
> +             u32 index, count;
> +             char *cstr, *istr;
> +
> +             hp_elog->id_type = PSERIES_HP_ELOG_ID_IC;
> +             arg += strlen("indexed-count ");
> +
> +             cstr = kstrdup(arg, GFP_KERNEL);
> +             istr = strchr(cstr, ' ');
> +             *istr++ = '\0';
> +
> +             if (kstrtou32(cstr, 0, &count) || kstrtou32(istr, 0, &index)) {
> +                     rc = -EINVAL;
> +                     pr_err("Invalid index or count : \"%s\"\n", buf);
> +                     kfree(cstr);
> +                     goto dlpar_store_out;
> +             }
> +
> +             kfree(cstr);
> +
> +             hp_elog->_drc_u.indexed_count[0] = cpu_to_be32(count);
> +             hp_elog->_drc_u.indexed_count[1] = cpu_to_be32(index);
> +     } else if (!strncmp(arg, "index", 5)) {
>               u32 index;
> 
>               hp_elog->id_type = PSERIES_HP_ELOG_ID_DRC_INDEX;
> diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c 
> b/arch/powerpc/platforms/pseries/hotplug-memory.c
> index 2ce1385..d7942ca 100644
> --- a/arch/powerpc/platforms/pseries/hotplug-memory.c
> +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
> @@ -701,6 +701,83 @@ static int dlpar_memory_add_by_index(u32 drc_index, 
> struct property *prop)
>       return rc;
>  }
> 
> +static int dlpar_memory_add_by_ic(u32 lmbs_to_add, u32 drc_index,
> +                               struct property *prop)
> +{
> +     struct of_drconf_cell *lmbs;
> +     u32 num_lmbs, *p;
> +     int i, rc;
> +     int lmbs_available = 0, start_index = 0, end_index;
> +
> +     pr_info("Attempting to hot-add %u LMB(s) at index %x\n",
> +             lmbs_to_add, drc_index);
> +
> +     if (lmbs_to_add == 0)
> +             return -EINVAL;
> +
> +     p = prop->value;
> +     num_lmbs = *p++;
> +     lmbs = (struct of_drconf_cell *)p;
> +
> +     /* Navigate to drc_index */
> +     while (start_index < num_lmbs) {
> +             if (lmbs[start_index].drc_index == drc_index)
> +                     break;
> +
> +             start_index++;
> +     }
> +
> +     end_index = start_index + lmbs_to_add;
> +
> +     /* Validate that there are enough LMBs to satisfy the request */
> +     for (i = start_index; i < end_index; i++) {
> +             if (lmbs[i].flags & DRCONF_MEM_RESERVED)
> +                     break;
> +
> +             lmbs_available++;
> +     }
> +
> +     if (lmbs_available < lmbs_to_add)
> +             return -EINVAL;
> +
> +     for (i = start_index; i < end_index; i++) {
> +             if (lmbs[i].flags & DRCONF_MEM_ASSIGNED)
> +                     continue;
> +
> +             rc = dlpar_add_lmb(&lmbs[i]);
> +             if (rc)
> +                     break;
> +
> +             lmbs[i].reserved = 1;
> +     }
> +
> +     if (rc) {
> +             pr_err("Memory indexed-count-add failed, removing any added 
> LMBs\n");
> +
> +             for (i = start_index; i < end_index; i++) {
> +                     if (!lmbs[i].reserved)
> +                             continue;
> +
> +                     rc = dlpar_remove_lmb(&lmbs[i]);
> +                     if (rc)
> +                             pr_err("Failed to remove LMB, drc index %x\n",
> +                                    be32_to_cpu(lmbs[i].drc_index));
> +             }
> +             rc = -EINVAL;
> +     } else {
> +             for (i = start_index; i < end_index; i++) {
> +                     if (!lmbs[i].reserved)
> +                             continue;
> +
> +                     pr_info("Memory at %llx (drc index %x) was hot-added\n",
> +                             lmbs[i].base_addr, lmbs[i].drc_index);
> +                     lmbs[i].reserved = 0;
> +             }
> +     }
> +
> +     return rc;
> +}
> +
>  int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
>  {
>       struct device_node *dn;
> @@ -708,9 +785,6 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
>       u32 count, drc_index;
>       int rc;
> 
> -     count = hp_elog->_drc_u.drc_count;
> -     drc_index = hp_elog->_drc_u.drc_index;
> -
>       lock_device_hotplug();
> 
>       dn = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
> @@ -727,19 +801,27 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
> 
>       switch (hp_elog->action) {
>       case PSERIES_HP_ELOG_ACTION_ADD:
> -             if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
> +             if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT) {
> +                     count = hp_elog->_drc_u.drc_count;
>                       rc = dlpar_memory_add_by_count(count, prop);
> -             else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
> +             } else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX) {
> +                     drc_index = hp_elog->_drc_u.drc_index;
>                       rc = dlpar_memory_add_by_index(drc_index, prop);
> -             else
> +             } else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_IC) {
> +                     count = hp_elog->_drc_u.indexed_count[0];
> +                     drc_index = hp_elog->_drc_u.indexed_count[1];
> +                     rc = dlpar_memory_add_by_ic(count, drc_index, prop);
> +             } else
>                       rc = -EINVAL;
>               break;
>       case PSERIES_HP_ELOG_ACTION_REMOVE:
> -             if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
> +             if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT) {
> +                     count = hp_elog->_drc_u.drc_count;
>                       rc = dlpar_memory_remove_by_count(count, prop);
> -             else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
> +             } else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX) {
> +                     drc_index = hp_elog->_drc_u.drc_index;
>                       rc = dlpar_memory_remove_by_index(drc_index, prop);
> -             else
> +             } else
>                       rc = -EINVAL;
>               break;
>       default:
> 
> On 07/18/2016 10:04 AM, Sahil Mehta wrote:
>> Indexed-count memory management allows addition and removal of contiguous
>> lmb blocks with a single command. When compared to the series of calls
>> previously required to manage contiguous blocks, indexed-count decreases
>> command frequency and reduces risk of buffer overflow.
>>
>> Changes in v2:
>> --------------
>> -[PATCH 1/2]:        -remove potential memory leak when parsing command
>>              -use u32s drc_index and count instead of u32 ic[]
>>               in dlpar_memory
>> -[PATCH 2/2]:        -use u32s drc_index and count instead of u32 ic[]
>>               in dlpar_memory
>>
>> -Sahil Mehta
>> ---
>>  include/asm/rtas.h                 |    2
>>  platforms/pseries/dlpar.c          |   34 ++++++
>>  platforms/pseries/hotplug-memory.c |  184 
>> +++++++++++++++++++++++++++++++++++--
>>  3 files changed, 208 insertions(+), 12 deletions(-)
>>
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>>
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
> 

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to