powerpc/memory: Add parallel routines to parse the new property
"ibm,dynamic-memory-v2" property when it is present, and then to
register the relevant memory blocks with the operating system.
This property format is intended to provide a more compact
representation of memory when communicating with the front end
processor, especially when describing vast amounts of RAM.
Signed-off-by: Michael Bringmann <m...@linux.vnet.ibm.com>
---
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 7f436ba..b9a1534 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -69,6 +69,8 @@ struct boot_param_header {
* OF address retreival & translation
*/
+extern int n_mem_addr_cells;
+
/* Parse the ibm,dma-window property of an OF node into the busno, phys and
* size parameters.
*/
@@ -81,8 +83,9 @@ extern void of_instantiate_rtc(void);
extern int of_get_ibm_chip_id(struct device_node *np);
/* The of_drconf_cell struct defines the layout of the LMB array
- * specified in the device tree property
- * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory
+ * specified in the device tree properties,
+ * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory
+ * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory-v2
*/
struct of_drconf_cell {
u64 base_addr;
@@ -92,9 +95,32 @@ struct of_drconf_cell {
u32 flags;
};
-#define DRCONF_MEM_ASSIGNED 0x00000008
-#define DRCONF_MEM_AI_INVALID 0x00000040
-#define DRCONF_MEM_RESERVED 0x00000080
+#define DRCONF_MEM_ASSIGNED 0x00000008
+#define DRCONF_MEM_AI_INVALID 0x00000040
+#define DRCONF_MEM_RESERVED 0x00000080
+
+struct of_drconf_cell_v2 {
+ u32 num_seq_lmbs;
+ u64 base_addr;
+ u32 drc_index;
+ u32 aa_index;
+ u32 flags;
+} __attribute__((packed));
+
+
+static inline int dyn_mem_v2_len(int entries)
+{
+ int drconf_v2_cells = (n_mem_addr_cells + 4);
+ int drconf_v2_cells_len = (drconf_v2_cells * sizeof(unsigned int));
+ return (((entries) * drconf_v2_cells_len) +
+ (1 * sizeof(unsigned int)));
+}
+
+extern void read_drconf_cell_v2(struct of_drconf_cell_v2 *drmem,
+ const __be32 **cellp);
+extern void read_one_drc_info(int **info, char **drc_type, char **drc_name,
+ unsigned long int *fdi_p, unsigned long int *nsl_p,
+ unsigned long int *si_p, unsigned long int *ldi_p);
/*
* There are two methods for telling firmware what our capabilities are.
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 669a15e..ad294ce 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -57,8 +57,10 @@
EXPORT_SYMBOL(node_data);
static int min_common_depth;
-static int n_mem_addr_cells, n_mem_size_cells;
+int n_mem_addr_cells;
+static int n_mem_size_cells;
static int form1_affinity;
+EXPORT_SYMBOL(n_mem_addr_cells);
#define MAX_DISTANCE_REF_POINTS 4
static int distance_ref_points_depth;
@@ -405,6 +405,24 @@ static void read_drconf_cell(struct of_drconf_cell *drmem,
const __be32 **cellp)
*cellp = cp + 4;
}
+
+ /*
+ * Retrieve and validate the ibm,dynamic-memory property of the device tree.
+ * Read the next memory block set entry from the ibm,dynamic-memory-v2 property
+ * and return the information in the provided of_drconf_cell_v2 structure.
+ */
+void read_drconf_cell_v2(struct of_drconf_cell_v2 *drmem, const __be32 **cellp)
+{
+ const __be32 *cp = (const __be32 *)*cellp;
+ drmem->num_seq_lmbs = be32_to_cpu(*cp++);
+ drmem->base_addr = read_n_cells(n_mem_addr_cells, &cp);
+ drmem->drc_index = be32_to_cpu(*cp++);
+ drmem->aa_index = be32_to_cpu(*cp++);
+ drmem->flags = be32_to_cpu(*cp++);
+
+ *cellp = cp;
+}
+EXPORT_SYMBOL(read_drconf_cell_v2);
/*
* Retrieve and validate the ibm,dynamic-memory property of the device tree.
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 946e34f..a55bc1e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -56,6 +56,7 @@
#include <asm/opal.h>
#include <asm/fadump.h>
#include <asm/debug.h>
+#include <asm/firmware.h>
#include <mm/mmu_decl.h>
@@ -441,12 +442,12 @@ static int __init early_init_dt_scan_chosen_ppc(unsigned
long node,
#ifdef CONFIG_PPC_PSERIES
/*
- * Interpret the ibm,dynamic-memory property in the
- * /ibm,dynamic-reconfiguration-memory node.
+ * Interpret the ibm,dynamic-memory property/ibm,dynamic-memory-v2
+ * in the /ibm,dynamic-reconfiguration-memory node.
* This contains a list of memory blocks along with NUMA affinity
* information.
*/
-static int __init early_init_dt_scan_drconf_memory(unsigned long node)
+static int __init early_init_dt_scan_drconf_memory_v1(unsigned long node)
{
const __be32 *dm, *ls, *usm;
int l;
@@ -516,6 +517,105 @@ static int __init
early_init_dt_scan_drconf_memory(unsigned long node)
memblock_dump_all();
return 0;
}
+
+static int __init early_init_dt_scan_drconf_memory_v2(unsigned long node)
+{
+ const __be32 *dm, *ls, *usm;
+ int l;
+ unsigned long num_sets;
+ u64 size, base, memblock_size;
+ unsigned int is_kexec_kdump = 0, rngs;
+
+ ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
+ if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
+ return 0;
+ memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+
+ dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory-v2", &l);
+ if (dm == NULL || l < sizeof(__be32))
+ return 0;
+
+ num_sets = of_read_number(dm++, 1);
+ if (l < (num_sets * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
+ return 0;
+
+ /* check if this is a kexec/kdump kernel. */
+ usm = of_get_flat_dt_prop(node, "linux,drconf-usable-memory", &l);
+ if (usm != NULL)
+ is_kexec_kdump = 1;
+
+ if (n_mem_addr_cells == 0)
+ n_mem_addr_cells = dt_root_addr_cells;
+
+ for (; num_sets != 0; --num_sets) {
+ struct of_drconf_cell_v2 drmem;
+ unsigned long nsl;
+
+ read_drconf_cell_v2(&drmem, &dm);
+ base = drmem.base_addr;
+ nsl = drmem.num_seq_lmbs;
+ size = memblock_size;
+
+ /* SKip this block if the reserved bit is set in flags
+ * or if the block is not assigned to this partition
+ */
+ if ((drmem.flags & DRCONF_MEM_RESERVED) ||
+ !(drmem.flags & DRCONF_MEM_ASSIGNED))
+ continue;
+
+ for (; nsl != 0; nsl--) {
+ size = memblock_size;
+ rngs = 1;
+ if (is_kexec_kdump)
+ /*
+ * For each memblock in ibm,dynamic-memory,
+ * a corresponding entry in
+ * linux,drconf-usable-memory property
+ * contains a counter 'p' followed by 'p'
+ * (base, size) duple. Now read the counter
+ * from linux,drconf-usable-memory property
+ */
+ rngs = dt_mem_next_cell(dt_root_size_cells,
+ &usm);
+
+ if (rngs) {
+ do {
+ if (is_kexec_kdump) {
+ base = dt_mem_next_cell(
+ dt_root_addr_cells,
+ &usm);
+ size = dt_mem_next_cell(
+ dt_root_size_cells,
+ &usm);
+ }
+ if (iommu_is_off) {
+ if (base >= 0x80000000ul)
+ continue;
+ if ((base + size) >
+ 0x80000000ul)
+ size = 0x80000000ul -
+ base;
+ }
+ memblock_add(base, size);
+ } while (--rngs);
+ }
+
+ base += size;
+ }
+ }
+
+ memblock_dump_all();
+ return 0;
+}
+
+static int __init early_init_dt_scan_drconf_memory(unsigned long node)
+{
+ if (firmware_has_feature(FW_FEATURE_DYN_MEM_V2))
+ return early_init_dt_scan_drconf_memory_v2(node);
+ else
+ return early_init_dt_scan_drconf_memory_v1(node);
+}
+
#else
#define early_init_dt_scan_drconf_memory(node) 0
#endif /* CONFIG_PPC_PSERIES */
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
