* Luck, Tony <[EMAIL PROTECTED]> wrote:
> > I'll start digging on why this doesn't boot ... but you might as well
> > send the fixes so far upstream to Linus so that the SMP fix is available
>
> Well a pure 2.6.24 version compiled with CONFIG_SMP=n booted just
> fine, so the breakage is recent ... and more than likely related to
> this change.
>
> I've only had a casual dig at the failing case ... kernel dies in
> memset() as called from kmem_cache_alloc() with the address being
> written as 0x4000000000117b48 (which is off in the virtual address
> space range used by users ... not a kernel address).
hm, as far as i could check, on ia64 UP the .percpu section link
difference was the only ia64 difference i could find out of those
changes. Could you try to copy a 2.6.24 include/asm-generic/percpu.h,
include/asm-ia64.h and include/linux/percpu.h into your current tree,
and see whether that boots? If yes, then it's the percpu changes. The
patch below does this ontop of very latest -git - and it builds fine
with your UP config with a crosscompiler.
> I'll dig some more tomorrow.
thanks.
Ingo
---
include/asm-generic/percpu.h | 99 ++++++++++++++++---------------------------
include/asm-ia64/percpu.h | 57 +++++++++++++++++++-----
include/linux/percpu.h | 20 --------
3 files changed, 82 insertions(+), 94 deletions(-)
Index: linux-x86.q/include/asm-generic/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/percpu.h
+++ linux-x86.q/include/asm-generic/percpu.h
@@ -3,79 +3,54 @@
#include <linux/compiler.h>
#include <linux/threads.h>
-/*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
-
+#define __GENERIC_PER_CPU
#ifdef CONFIG_SMP
-/*
- * per_cpu_offset() is the offset that has to be added to a
- * percpu variable to get to the instance for a certain processor.
- *
- * Most arches use the __per_cpu_offset array for those offsets but
- * some arches have their own ways of determining the offset (x86_64, s390).
- */
-#ifndef __per_cpu_offset
extern unsigned long __per_cpu_offset[NR_CPUS];
#define per_cpu_offset(x) (__per_cpu_offset[x])
-#endif
-
-/*
- * Determine the offset for the currently active processor.
- * An arch may define __my_cpu_offset to provide a more effective
- * means of obtaining the offset to the per cpu variables of the
- * current processor.
- */
-#ifndef __my_cpu_offset
-#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
-#define my_cpu_offset per_cpu_offset(smp_processor_id())
-#else
-#define my_cpu_offset __my_cpu_offset
-#endif
-
-/*
- * Add a offset to a pointer but keep the pointer as is.
- *
- * Only S390 provides its own means of moving the pointer.
- */
-#ifndef SHIFT_PERCPU_PTR
-#define SHIFT_PERCPU_PTR(__p, __offset) RELOC_HIDE((__p), (__offset))
-#endif
-
-/*
- * A percpu variable may point to a discarded regions. The following are
- * established ways to produce a usable pointer from the percpu variable
- * offset.
- */
-#define per_cpu(var, cpu) \
- (*SHIFT_PERCPU_PTR(&per_cpu_var(var), per_cpu_offset(cpu)))
-#define __get_cpu_var(var) \
- (*SHIFT_PERCPU_PTR(&per_cpu_var(var), my_cpu_offset))
-#define __raw_get_cpu_var(var) \
- (*SHIFT_PERCPU_PTR(&per_cpu_var(var), __my_cpu_offset))
-
-
-#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
-extern void setup_per_cpu_areas(void);
-#endif
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name) \
+ __attribute__((__section__(".data.percpu"))) __typeof__(type)
per_cpu__##name
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ __attribute__((__section__(".data.percpu.shared_aligned"))) \
+ __typeof__(type) per_cpu__##name \
+ ____cacheline_aligned_in_smp
+
+/* var is in discarded region: offset to particular copy we want */
+#define per_cpu(var, cpu) (*({ \
+ extern int simple_identifier_##var(void); \
+ RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
+#define __get_cpu_var(var) per_cpu(var, smp_processor_id())
+#define __raw_get_cpu_var(var) per_cpu(var, raw_smp_processor_id())
+
+/* A macro to avoid #include hell... */
+#define percpu_modcopy(pcpudst, src, size) \
+do { \
+ unsigned int __i; \
+ for_each_possible_cpu(__i) \
+ memcpy((pcpudst)+__per_cpu_offset[__i], \
+ (src), (size)); \
+} while (0)
#else /* ! SMP */
-#define per_cpu(var, cpu) (*((void)(cpu),
&per_cpu_var(var)))
-#define __get_cpu_var(var) per_cpu_var(var)
-#define __raw_get_cpu_var(var) per_cpu_var(var)
+#define DEFINE_PER_CPU(type, name) \
+ __typeof__(type) per_cpu__##name
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DEFINE_PER_CPU(type, name)
+
+#define per_cpu(var, cpu) (*((void)(cpu),
&per_cpu__##var))
+#define __get_cpu_var(var) per_cpu__##var
+#define __raw_get_cpu_var(var) per_cpu__##var
#endif /* SMP */
-#ifndef PER_CPU_ATTRIBUTES
-#define PER_CPU_ATTRIBUTES
-#endif
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
- __typeof__(type) per_cpu_var(name)
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
#endif /* _ASM_GENERIC_PERCPU_H_ */
Index: linux-x86.q/include/asm-ia64/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-ia64/percpu.h
+++ linux-x86.q/include/asm-ia64/percpu.h
@@ -15,36 +15,69 @@
#include <linux/threads.h>
-#ifdef CONFIG_SMP
-
#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
-# define PER_CPU_ATTRIBUTES __attribute__((__model__ (__small__)))
+# define __SMALL_ADDR_AREA __attribute__((__model__ (__small__)))
+#else
+# define __SMALL_ADDR_AREA
#endif
-#define __my_cpu_offset __ia64_per_cpu_var(local_per_cpu_offset)
+#define DECLARE_PER_CPU(type, name) \
+ extern __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DEFINE_PER_CPU(type, name) \
+ __attribute__((__section__(".data.percpu"))) \
+ __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
+
+#ifdef CONFIG_SMP
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ __attribute__((__section__(".data.percpu.shared_aligned"))) \
+ __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name \
+ ____cacheline_aligned_in_smp
+#else
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DEFINE_PER_CPU(type, name)
+#endif
+
+/*
+ * Pretty much a literal copy of asm-generic/percpu.h, except that
percpu_modcopy() is an
+ * external routine, to avoid include-hell.
+ */
+#ifdef CONFIG_SMP
+
+extern unsigned long __per_cpu_offset[NR_CPUS];
+#define per_cpu_offset(x) (__per_cpu_offset[x])
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+
+#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var,
__per_cpu_offset[cpu]))
+#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var,
__ia64_per_cpu_var(local_per_cpu_offset)))
+#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var,
__ia64_per_cpu_var(local_per_cpu_offset)))
+
+extern void percpu_modcopy(void *pcpudst, const void *src, unsigned long size);
+extern void setup_per_cpu_areas (void);
extern void *per_cpu_init(void);
#else /* ! SMP */
-#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu")))
-
+#define per_cpu(var, cpu) (*((void)(cpu),
&per_cpu__##var))
+#define __get_cpu_var(var) per_cpu__##var
+#define __raw_get_cpu_var(var) per_cpu__##var
#define per_cpu_init() (__phys_per_cpu_start)
#endif /* SMP */
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var)
EXPORT_SYMBOL_GPL(per_cpu__##var)
+
/*
* Be extremely careful when taking the address of this variable! Due to
virtual
* remapping, it is different from the canonical address returned by
__get_cpu_var(var)!
* On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var()
is slightly
* more efficient.
*/
-#define __ia64_per_cpu_var(var) per_cpu__##var
-
-#include <asm-generic/percpu.h>
-
-/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
-DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+#define __ia64_per_cpu_var(var) (per_cpu__##var)
#endif /* !__ASSEMBLY__ */
Index: linux-x86.q/include/linux/percpu.h
===================================================================
--- linux-x86.q.orig/include/linux/percpu.h
+++ linux-x86.q/include/linux/percpu.h
@@ -9,26 +9,6 @@
#include <asm/percpu.h>
-#ifdef CONFIG_SMP
-#define DEFINE_PER_CPU(type, name) \
- __attribute__((__section__(".data.percpu"))) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name \
- ____cacheline_aligned_in_smp
-#else
-#define DEFINE_PER_CPU(type, name) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU(type, name)
-#endif
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
/* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
#ifndef PERCPU_ENOUGH_ROOM
#ifdef CONFIG_MODULES
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
