On Mon, 2017-10-30 at 10:15 +0100, Boris Brezillon wrote:
> On Tue, 10 Oct 2017 14:32:52 +1100
> Cyril Bur <cyril...@gmail.com> wrote:
>
> > V4: Rework and rethink.
> >
> > To recap:
> > Userspace MTD read()s/write()s and erases to powernv_flash become
> > calls into the OPAL firmware which subsequently handles flash access.
> > Because the read()s, write()s or erases can be large (bounded of
> > course my the size of flash) OPAL may take some time to service the
> > request, this causes the powernv_flash driver to sit in a wait_event()
> > for potentially minutes. This causes two problems, firstly, tools
> > appear to hang for the entire time as they cannot be interrupted by
> > signals and secondly, this can trigger hung task warnings. The correct
> > solution is to use wait_event_interruptible() which my rework (as part
> > of this series) of the opal-async infrastructure provides.
> >
> > The final patch in this series achieves this. It should eliminate both
> > hung tasks and threads locking up.
> >
> > Included in this series are other simpler fixes for powernv_flash:
> >
> > Don't always return EIO on error. OPAL does mutual exclusion on the
> > flash and also knows when the service processor takes control of the
> > flash, in both of these cases it will return OPAL_BUSY, translating
> > this to EIO is misleading to userspace.
> >
> > Handle receiving OPAL_SUCCESS when it expects OPAL_ASYNC_COMPLETION
> > and don't treat it as an error. Unfortunately there are too many drivers
> > out there with the incorrect behaviour so this means OPAL can never
> > return anything but OPAL_ASYNC_COMPLETION, this shouldn't prevent the
> > code from being correct.
> >
> > Don't return ERESTARTSYS if token acquisition is interrupted as
> > powernv_flash can't be sure it hasn't already performed some work, let
> > userspace deal with the problem.
> >
> > Change the incorrect use of BUG_ON() to WARN_ON() in powernv_flash.
> >
> > Not for powernv_flash, a fix from Stewart Smith which fits into this
> > series as it relies on my improvements to the opal-async
> > infrastructure.
> >
> > V3: export opal_error_code() so that powernv_flash can be built=m
> >
> > Hello,
> >
> > Version one of this series ignored that OPAL may continue to use
> > buffers passed to it after Linux kfree()s the buffer. This version
> > addresses this, not in a particularly nice way - future work could
> > make this better. This version also includes a few cleanups and fixups
> > to powernv_flash driver one along the course of this work that I
> > thought I would just send.
> >
> > The problem we're trying to solve here is that currently all users of
> > the opal-async calls must use wait_event(), this may be undesirable
> > when there is a userspace process behind the request for the opal
> > call, if OPAL takes too long to complete the call then hung task
> > warnings will appear.
> >
> > In order to solve the problem callers should use
> > wait_event_interruptible(), due to the interruptible nature of this
> > call the opal-async infrastructure needs to track extra state
> > associated with each async token, this is prepared for in patch 6/10.
> >
> > While I was working on the opal-async infrastructure improvements
> > Stewart fixed another problem and he relies on the corrected behaviour
> > of opal-async so I've sent it here.
> >
> > Hello MTD folk, traditionally Michael Ellerman takes powernv_flash
> > driver patches through the powerpc tree, as always your feedback is
> > very welcome.
>
> Just gave my acks on patches 1 to 4 and patch 10 (with minor comments
> on patch 3 and 10). Feel free to take the patches directly through the
> powerpc tree.
>
Hi Boris, thanks very much for the acks.
All good points - I'll fix that up in a v2
Thanks again,
Cyril
> >
> > Thanks,
> >
> > Cyril
> >
> > Cyril Bur (9):
> > mtd: powernv_flash: Use WARN_ON_ONCE() rather than BUG_ON()
> > mtd: powernv_flash: Don't treat OPAL_SUCCESS as an error
> > mtd: powernv_flash: Remove pointless goto in driver init
> > mtd: powernv_flash: Don't return -ERESTARTSYS on interrupted token
> > acquisition
> > powerpc/opal: Make __opal_async_{get,release}_token() static
> > powerpc/opal: Rework the opal-async interface
> > powerpc/opal: Add opal_async_wait_response_interruptible() to
> > opal-async
> > powerpc/powernv: Add OPAL_BUSY to opal_error_code()
> > mtd: powernv_flash: Use opal_async_wait_response_interruptible()
> >
> > Stewart Smith (1):
> > powernv/opal-sensor: remove not needed lock
> >
> > arch/powerpc/include/asm/opal.h | 4 +-
> > arch/powerpc/platforms/powernv/opal-async.c | 183
> > +++++++++++++++++++--------
> > arch/powerpc/platforms/powernv/opal-sensor.c | 17 +--
> > arch/powerpc/platforms/powernv/opal.c | 2 +
> > drivers/mtd/devices/powernv_flash.c | 83 +++++++-----
> > 5 files changed, 194 insertions(+), 95 deletions(-)
> >
>
>
