On Fri, Feb 09, 2018 at 04:55:20PM +0100, Mathieu Malaterre wrote: > >> $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig > >> $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage > > > > Works fine for me (exact same arch and defconfig). Two differences: > > 1) I also set CROSS_COMPILE during the config step; > > 2) I don't build zImage, just the default (but manual "make zImage" > > afterwards works fine). > > Could you run command (2) a second time on your system.
That works fine, also with -j$BIG . > $ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig > $ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage > -> ok so far > $ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- Ah. I configure with O=, but then cd to that dir and build without O= . Also not in a subdir of the kernel source tree. make ARCH=$ARCH CROSS_COMPILE=$TARGET- -C $KERNEL_SRC O=$PWD $DEFCONFIG make ARCH=$ARCH CROSS_COMPILE=$TARGET- $MAKEOPTS (everything run in the build dir). Segher
