Code clean-up for tsi108_eth network driver.
This patch removes not needed dummy read and the corresponding comment.
The PHY logic requires two reads from the status register to get
current link status. This is done correctly inside mii_check_media().
Signed-off-by: Alexandre Bounine <[EMAIL PROTECTED]>
---
diff -pNur linux-2.6.24/drivers/net/tsi108_eth.c
linux-2.6.24-fix/drivers/net/tsi108_eth.c
--- linux-2.6.24/drivers/net/tsi108_eth.c 2008-02-06
15:47:35.000000000 -0500
+++ linux-2.6.24-fix/drivers/net/tsi108_eth.c 2008-02-06
15:54:14.000000000 -0500
@@ -297,18 +297,11 @@ static void tsi108_check_phy(struct net_
u32 speed;
unsigned long flags;
- /* Do a dummy read, as for some reason the first read
- * after a link becomes up returns link down, even if
- * it's been a while since the link came up.
- */
-
spin_lock_irqsave(&phy_lock, flags);
if (!data->phy_ok)
goto out;
- tsi108_read_mii(data, MII_BMSR);
-
duplex = mii_check_media(&data->mii_if, netif_msg_link(data),
data->init_media);
data->init_media = 0;
---
Important Notice: This message is intended for the use of the individual to
whom it is addressed and may contain information which is privileged,
confidential and/or exempt from disclosure under applicable law. If the reader
of this message is not the intended recipient, or is not the employee or agent
responsible for delivering the message to the intended recipient, you are
hereby notified that any dissemination, distribution, or copying of this
communication is strictly prohibited. If you have received this communication
in error, please notify the sender immediately by telephone or return e-mail
and delete the original message from your systems. Thank you.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
