On Thu, Apr 10, 2008 at 12:44:43PM +0200, Marian Balakowicz wrote: > Last year you have posted a MPC5200 PSC AC97 driver patch > "[PATCH 9/9] sound: Add support for Freescale MPC5200 AC97 interface." > with the following comment: > > > Not quite a clean driver, but it get things done (well, mostly). > > Only included to be able to test functionalityi/usage of > > the BestComm driver. > > There are various FIXMEs and commented out code here and there. > Could you elaborate a bit on the overall state of the driver's > functionality, > which areas need improvement and attention? > > Seems that you mainly tested BestComm with this driver, what was the > overall > BestComm performance, any issues here? Did you use any specific test setup > involving some dedicated application, etc.? > > Did anyone else tried it and/or has a updated version or can share > experience?
Sidenote: last time we tried (2.6.23.1), the AC97 driver didn't work, tested on the phyCORE-MPC5200B-tiny board. No sound, just a little bit noise which can be muted with the mixer. And music finishes about 7 times as fast as it usually should. So we didn't manage to make it work yet. Robert -- Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Hannoversche Str. 2, 31134 Hildesheim, Germany Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev