On Thu, Aug 29, 2019 at 10:43:18AM +0530, Kishon Vijay Abraham I wrote: > Gustavo, > > On 27/08/19 6:55 PM, Andrew Murray wrote: > > On Sat, Aug 24, 2019 at 12:08:40AM +0000, Xiaowei Bao wrote: > >> > >> > >>> -----Original Message----- > >>> From: Andrew Murray <[email protected]> > >>> Sent: 2019年8月23日 21:58 > >>> To: Xiaowei Bao <[email protected]> > >>> Cc: [email protected]; [email protected]; [email protected]; > >>> [email protected]; Leo Li <[email protected]>; [email protected]; > >>> [email protected]; [email protected]; [email protected]; M.h. > >>> Lian <[email protected]>; Mingkai Hu <[email protected]>; Roy > >>> Zang <[email protected]>; [email protected]; > >>> [email protected]; [email protected]; > >>> [email protected]; [email protected]; > >>> [email protected]; [email protected] > >>> Subject: Re: [PATCH v2 07/10] PCI: layerscape: Modify the MSIX to the > >>> doorbell way > >>> > >>> On Thu, Aug 22, 2019 at 07:22:39PM +0800, Xiaowei Bao wrote: > >>>> The layerscape platform use the doorbell way to trigger MSIX interrupt > >>>> in EP mode. > >>>> > >>> > >>> I have no problems with this patch, however... > >>> > >>> Are you able to add to this message a reason for why you are making this > >>> change? Did dw_pcie_ep_raise_msix_irq not work when func_no != 0? Or did > >>> it work yet dw_pcie_ep_raise_msix_irq_doorbell is more efficient? > >> > >> The fact is that, this driver is verified in ls1046a platform of NXP > >> before, and ls1046a don't > >> support MSIX feature, so I set the msix_capable of pci_epc_features struct > >> is false, > >> but in other platform, e.g. ls1088a, it support the MSIX feature, I > >> verified the MSIX > >> feature in ls1088a, it is not OK, so I changed to another way. Thanks. > > > > Right, so the existing pci-layerscape-ep.c driver never supported MSIX yet > > it > > erroneously had a switch case statement to call dw_pcie_ep_raise_msix_irq > > which > > would never get used. > > > > Now that we're adding a platform with MSIX support the existing > > dw_pcie_ep_raise_msix_irq doesn't work (for this platform) so we are adding > > a > > different method. > > Gustavo, can you confirm dw_pcie_ep_raise_msix_irq() works for > designware as it didn't work for both me and Xiaowei?
This question needs an answer. Thanks, Lorenzo
