From: Sascha Hauer <[EMAIL PROTECTED]>
Add a set_type function for external (GPIO) interrupts.
Signed-off-by: Juergen Beisert <[EMAIL PROTECTED]>
Signed-off-by: Sascha Hauer <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/52xx/mpc52xx_pic.c | 38 ++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
Index: arch/powerpc/platforms/52xx/mpc52xx_pic.c
===================================================================
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c.orig 2008-04-15
11:25:29.000000000 +0200
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c 2008-04-15 11:25:39.000000000
+0200
@@ -18,6 +18,7 @@
#undef DEBUG
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <asm/io.h>
@@ -109,11 +110,48 @@
io_be_setbit(&intr->ctrl, 27-l2irq);
}
+static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
+{
+ u32 ctrl_reg, type;
+ int irq;
+ int l2irq;
+
+ irq = irq_map[virq].hwirq;
+ l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
+
+ pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq,
flow_type);
+
+ switch (flow_type) {
+ case IRQF_TRIGGER_HIGH:
+ type = 0;
+ break;
+ case IRQF_TRIGGER_RISING:
+ type = 1;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ type = 2;
+ break;
+ case IRQF_TRIGGER_LOW:
+ type = 3;
+ break;
+ default:
+ type = 0;
+ }
+
+ ctrl_reg = in_be32(&intr->ctrl);
+ ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
+ ctrl_reg |= (type << (22 - (l2irq * 2)));
+ out_be32(&intr->ctrl, ctrl_reg);
+
+ return 0;
+}
+
static struct irq_chip mpc52xx_extirq_irqchip = {
.typename = " MPC52xx IRQ[0-3] ",
.mask = mpc52xx_extirq_mask,
.unmask = mpc52xx_extirq_unmask,
.ack = mpc52xx_extirq_ack,
+ .set_type = mpc52xx_extirq_set_type,
};
/*
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
