On Tue, 2008-04-15 at 23:51 +0200, Markus Brunner wrote: > On Monday 14 April 2008, Benjamin Herrenschmidt wrote: > > > 2) On the 405EP only the MDIO pin of the emac0 is pinned out, so both > > > phys have to be accessed through this one. This affectes the mdio > > > read/write functions. > > > > The later can easily be described in the device-tree as it's a fairly > > common setup. > > mdio-device does the trick. This feature wasn't used by any other board in > the > kernel yet. > > I made another error. I did mix up the order of the MAL irqs, so the irq > handlers went mad. This was detected as a soft lock-up. > > After correcting that both emacs are working on ppc405EP :).
Cool. Btw, new board ports are welcome :). josh _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
