Excerpts from Pratik Rajesh Sampat's message of July 18, 2020 4:53 am:
> POWER9 onwards the support for the registers HID1, HID4, HID5 has been
> receded.
> Although mfspr on the above registers worked in Power9, In Power10
> simulator is unrecognized. Moving their assignment under the
> check for machines lower than Power9
>
> Signed-off-by: Pratik Rajesh Sampat <psam...@linux.ibm.com>
> Reviewed-by: Gautham R. Shenoy <e...@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npig...@gmail.com>
> ---
> arch/powerpc/platforms/powernv/idle.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/idle.c
> b/arch/powerpc/platforms/powernv/idle.c
> index d439e11af101..d24d6671f3e8 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -73,9 +73,6 @@ static int pnv_save_sprs_for_deep_states(void)
> */
> uint64_t lpcr_val = mfspr(SPRN_LPCR);
> uint64_t hid0_val = mfspr(SPRN_HID0);
> - uint64_t hid1_val = mfspr(SPRN_HID1);
> - uint64_t hid4_val = mfspr(SPRN_HID4);
> - uint64_t hid5_val = mfspr(SPRN_HID5);
> uint64_t hmeer_val = mfspr(SPRN_HMEER);
> uint64_t msr_val = MSR_IDLE;
> uint64_t psscr_val = pnv_deepest_stop_psscr_val;
> @@ -117,6 +114,9 @@ static int pnv_save_sprs_for_deep_states(void)
>
> /* Only p8 needs to set extra HID regiters */
> if (!pvr_version_is(PVR_POWER9)) {
> + uint64_t hid1_val = mfspr(SPRN_HID1);
> + uint64_t hid4_val = mfspr(SPRN_HID4);
> + uint64_t hid5_val = mfspr(SPRN_HID5);
>
> rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
> if (rc != 0)
> --
> 2.25.4
>
>
