Add the description of the embedded L2 switch inside the SoC dtsi file
for NXP T1040.
Signed-off-by: Vladimir Oltean <olte...@gmail.com>
---
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 75 +++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 315d0557eefc..4af856dcc6a3 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -628,6 +628,81 @@ mdio@fd000 {
status = "disabled";
};
};
+
+ seville_switch: ethernet-switch@800000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,vsc9953-switch";
+ little-endian;
+ reg = <0x800000 0x290000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ seville_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ seville_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ seville_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ seville_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ seville_port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+
+ seville_port5: port@5 {
+ reg = <5>;
+ status = "disabled";
+ };
+
+ seville_port6: port@6 {
+ reg = <6>;
+ status = "disabled";
+ };
+
+ seville_port7: port@7 {
+ reg = <7>;
+ status = "disabled";
+ };
+
+ seville_port8: port@8 {
+ reg = <8>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+
+ seville_port9: port@9 {
+ reg = <9>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+ };
+ };
+ };
};
&qe {
--
2.25.1
