Nice to hear that, next week I'll try and let you know. Thank you again for your support, Fabrizio
On Fri, May 9, 2008 at 5:20 PM, Grant Likely <[EMAIL PROTECTED]> wrote: > On Fri, May 9, 2008 at 9:02 AM, Fabri <[EMAIL PROTECTED]> wrote: >> Thanks for the patches, now some more rows are printed after RamDisk loading: >> >> Verifying Checksum ... OK >> Loading Ramdisk to 0fe68000, end 0ff49bf2 ... OK >> Memory <- <0x0 0x10000000> (256MB) >> CPU clock-frequency <- 0xbcd3d80 (198MHz) >> CPU timebase-frequency <- 0x1f78a40 (33MHz) >> CPU bus-frequency <- 0x7de2900 (132MHz) >> >> zImage starting: loaded at 0x00400000 (sp: 0x0ff4a958) >> Allocating 0x32d410 bytes for kernel ... >> gunzipping (0x00000000 <- 0x0040d000:0x00730fd4)...done 0x30d150 bytes >> Using loader supplied ramdisk at 0xfe68000-0xff49bf2 >> initrd head: 0x1f8b0808 >> >> Linux/PowerPC load: > ^^^^^^^^^^^^^^^^^^ > > Doesn't look like you are passing a kernel parameters line. The > kernel probably is booting, but doesn't know where to output the > console. Try adding "console=ttyPSC0,115200". > > Cheers, > g. > >> > > -- > Grant Likely, B.Sc., P.Eng. > Secret Lab Technologies Ltd. > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
