De-duplicate, and fix up the comments, and make the prototype just take a
pci_dn since the job of the function is to return the pe_config_addr of the
PE which contains a given device.
Signed-off-by: Oliver O'Halloran <ooh...@gmail.com>
---
arch/powerpc/platforms/pseries/eeh_pseries.c | 80 +++-----------------
1 file changed, 11 insertions(+), 69 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c
b/arch/powerpc/platforms/pseries/eeh_pseries.c
index b1561961c7ff..10303de3d8d5 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -33,8 +33,6 @@
#include <asm/ppc-pci.h>
#include <asm/rtas.h>
-static int pseries_eeh_get_pe_addr(struct pci_dn *pdn);
-
/* RTAS tokens */
static int ibm_set_eeh_option;
static int ibm_set_slot_reset;
@@ -86,7 +84,8 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
/**
- * pseries_eeh_get_config_addr - Retrieve config address
+ * pseries_eeh_get_pe_config_addr - Find the pe_config_addr for a device
+ * @pdn: pci_dn of the input device
*
* Retrieve the assocated config address. Actually, there're 2 RTAS
* function calls dedicated for the purpose. We need implement
@@ -97,16 +96,17 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
* It's notable that zero'ed return value means invalid PE config
* address.
*/
-static int pseries_eeh_get_config_addr(struct pci_controller *phb, int
config_addr)
+static int pseries_eeh_get_pe_config_addr(struct pci_dn *pdn)
{
+ int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
+ struct pci_controller *phb = pdn->phb;
int ret = 0;
int rets[3];
if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
/*
- * First of all, we need to make sure there has one PE
- * associated with the device. Otherwise, PE address is
- * meaningless.
+ * First of all, use function 1 to determine if this device is
+ * part of a PE or not. ret[0] being zero indicates it's not.
*/
ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
config_addr, BUID_HI(phb->buid),
@@ -431,7 +431,7 @@ void pseries_eeh_init_edev(struct pci_dn *pdn)
struct eeh_pe *parent;
/* Retrieve PE address */
- edev->pe_config_addr = pseries_eeh_get_pe_addr(pdn);
+ edev->pe_config_addr = pseries_eeh_get_pe_config_addr(pdn);
pe.addr = edev->pe_config_addr;
/* Some older systems (Power4) allow the ibm,set-eeh-option
@@ -551,64 +551,6 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int
option)
return ret;
}
-/**
- * pseries_eeh_get_pe_addr - Retrieve PE address
- * @pe: EEH PE
- *
- * Retrieve the assocated PE address. Actually, there're 2 RTAS
- * function calls dedicated for the purpose. We need implement
- * it through the new function and then the old one. Besides,
- * you should make sure the config address is figured out from
- * FDT node before calling the function.
- *
- * It's notable that zero'ed return value means invalid PE config
- * address.
- */
-static int pseries_eeh_get_pe_addr(struct pci_dn *pdn)
-{
- int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
- unsigned long buid = pdn->phb->buid;
- int ret = 0;
- int rets[3];
-
- if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
- /*
- * First of all, we need to make sure there has one PE
- * associated with the device. Otherwise, PE address is
- * meaningless.
- */
- ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
- config_addr, BUID_HI(buid), BUID_LO(buid), 1);
- if (ret || (rets[0] == 0))
- return 0;
-
- /* Retrieve the associated PE config address */
- ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
- config_addr, BUID_HI(buid), BUID_LO(buid), 0);
- if (ret) {
- pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
- __func__, pdn->phb->global_number, config_addr);
- return 0;
- }
-
- return rets[0];
- }
-
- if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
- config_addr, BUID_HI(buid), BUID_LO(buid), 0);
- if (ret) {
- pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
- __func__, pdn->phb->global_number, config_addr);
- return 0;
- }
-
- return rets[0];
- }
-
- return ret;
-}
-
/**
* pseries_eeh_get_state - Retrieve PE state
* @pe: EEH PE
@@ -911,7 +853,7 @@ static int __init eeh_pseries_init(void)
{
struct pci_controller *phb;
struct pci_dn *pdn;
- int ret, addr, config_addr;
+ int ret, config_addr;
/* figure out EEH RTAS function call tokens */
ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
@@ -969,8 +911,8 @@ static int __init eeh_pseries_init(void)
pr_info("Issue PHB reset ...\n");
list_for_each_entry(phb, &hose_list, list_node) {
pdn = list_first_entry(&PCI_DN(phb->dn)->child_list,
struct pci_dn, list);
- addr = (pdn->busno << 16) | (pdn->devfn << 8);
- config_addr = pseries_eeh_get_config_addr(phb, addr);
+ config_addr = pseries_eeh_get_pe_config_addr(pdn);
+
/* invalid PE config addr */
if (config_addr == 0)
continue;
--
2.26.2
