Previously setup_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.
Rewrite setup_sigcontext() to assume that a userspace write access window
is open. Replace all uaccess functions with their 'unsafe' versions
which avoid the repeated uaccess switches.
Signed-off-by: Christopher M. Riedl <c...@codefail.de>
---
arch/powerpc/kernel/signal_64.c | 70 ++++++++++++++++++++-------------
1 file changed, 43 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index d3e9519b2e62..3f25309826b6 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -101,9 +101,13 @@ static void prepare_setup_sigcontext(struct task_struct
*tsk, int ctx_has_vsx_re
* Set up the sigcontext for the signal frame.
*/
-static long setup_sigcontext(struct sigcontext __user *sc,
- struct task_struct *tsk, int signr, sigset_t *set,
- unsigned long handler, int ctx_has_vsx_region)
+#define unsafe_setup_sigcontext(sc, tsk, signr, set, handler, \
+ ctx_has_vsx_region, e) \
+ unsafe_op_wrap(__unsafe_setup_sigcontext(sc, tsk, signr, set, \
+ handler, ctx_has_vsx_region), e)
+static long notrace __unsafe_setup_sigcontext(struct sigcontext __user *sc,
+ struct task_struct *tsk, int signr,
sigset_t *set,
+ unsigned long handler, int
ctx_has_vsx_region)
{
/* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
* process never used altivec yet (MSR_VEC is zero in pt_regs of
@@ -118,20 +122,19 @@ static long setup_sigcontext(struct sigcontext __user *sc,
#endif
struct pt_regs *regs = tsk->thread.regs;
unsigned long msr = regs->msr;
- long err = 0;
/* Force usr to alway see softe as 1 (interrupts enabled) */
unsigned long softe = 0x1;
BUG_ON(tsk != current);
#ifdef CONFIG_ALTIVEC
- err |= __put_user(v_regs, &sc->v_regs);
+ unsafe_put_user(v_regs, &sc->v_regs, efault_out);
/* save altivec registers */
if (tsk->thread.used_vr) {
/* Copy 33 vec registers (vr0..31 and vscr) to the stack */
- err |= __copy_to_user(v_regs, &tsk->thread.vr_state,
- 33 * sizeof(vector128));
+ unsafe_copy_to_user(v_regs, &tsk->thread.vr_state,
+ 33 * sizeof(vector128), efault_out);
/* set MSR_VEC in the MSR value in the frame to indicate that
sc->v_reg)
* contains valid data.
*/
@@ -140,12 +143,12 @@ static long setup_sigcontext(struct sigcontext __user *sc,
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec.
*/
- err |= __put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33]);
+ unsafe_put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33],
efault_out);
#else /* CONFIG_ALTIVEC */
- err |= __put_user(0, &sc->v_regs);
+ unsafe_put_user(0, &sc->v_regs, efault_out);
#endif /* CONFIG_ALTIVEC */
/* copy fpr regs and fpscr */
- err |= copy_fpr_to_user(&sc->fp_regs, tsk);
+ unsafe_copy_fpr_to_user(&sc->fp_regs, tsk, efault_out);
/*
* Clear the MSR VSX bit to indicate there is no valid state attached
@@ -160,24 +163,27 @@ static long setup_sigcontext(struct sigcontext __user *sc,
*/
if (tsk->thread.used_vsr && ctx_has_vsx_region) {
v_regs += ELF_NVRREG;
- err |= copy_vsx_to_user(v_regs, tsk);
+ unsafe_copy_vsx_to_user(v_regs, tsk, efault_out);
/* set MSR_VSX in the MSR value in the frame to
* indicate that sc->vs_reg) contains valid data.
*/
msr |= MSR_VSX;
}
#endif /* CONFIG_VSX */
- err |= __put_user(&sc->gp_regs, &sc->regs);
+ unsafe_put_user(&sc->gp_regs, &sc->regs, efault_out);
WARN_ON(!FULL_REGS(regs));
- err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
- err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
- err |= __put_user(softe, &sc->gp_regs[PT_SOFTE]);
- err |= __put_user(signr, &sc->signal);
- err |= __put_user(handler, &sc->handler);
+ unsafe_copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE, efault_out);
+ unsafe_put_user(msr, &sc->gp_regs[PT_MSR], efault_out);
+ unsafe_put_user(softe, &sc->gp_regs[PT_SOFTE], efault_out);
+ unsafe_put_user(signr, &sc->signal, efault_out);
+ unsafe_put_user(handler, &sc->handler, efault_out);
if (set != NULL)
- err |= __put_user(set->sig[0], &sc->oldmask);
+ unsafe_put_user(set->sig[0], &sc->oldmask, efault_out);
- return err;
+ return 0;
+
+efault_out:
+ return -EFAULT;
}
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -664,12 +670,15 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *,
old_ctx,
if (old_ctx != NULL) {
prepare_setup_sigcontext(current, ctx_has_vsx_region);
- if (!access_ok(old_ctx, ctx_size)
- || setup_sigcontext(&old_ctx->uc_mcontext, current, 0,
NULL, 0,
- ctx_has_vsx_region)
- || __copy_to_user(&old_ctx->uc_sigmask,
- ¤t->blocked, sizeof(sigset_t)))
+ if (!user_write_access_begin(old_ctx, ctx_size))
return -EFAULT;
+
+ unsafe_setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL,
+ 0, ctx_has_vsx_region, efault_out);
+ unsafe_copy_to_user(&old_ctx->uc_sigmask, ¤t->blocked,
+ sizeof(sigset_t), efault_out);
+
+ user_write_access_end();
}
if (new_ctx == NULL)
return 0;
@@ -698,6 +707,10 @@ SYSCALL_DEFINE3(swapcontext, struct ucontext __user *,
old_ctx,
/* This returns like rt_sigreturn */
set_thread_flag(TIF_RESTOREALL);
return 0;
+
+efault_out:
+ user_write_access_end();
+ return -EFAULT;
}
@@ -849,9 +862,12 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
} else {
err |= __put_user(0, &frame->uc.uc_link);
prepare_setup_sigcontext(tsk, 1);
- err |= setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig,
- NULL, (unsigned
long)ksig->ka.sa.sa_handler,
- 1);
+ if (!user_write_access_begin(frame, sizeof(struct rt_sigframe)))
+ return -EFAULT;
+ err |= __unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk,
+ ksig->sig, NULL,
+ (unsigned
long)ksig->ka.sa.sa_handler, 1);
+ user_write_access_end();
}
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
--
2.29.0
