On Jun 5, 2008, at 4:05 AM, Wolfgang Grandegger wrote:
[POWERPC] 85xx: add board support for the TQM8548 modules
This patch adds support for the TQM8548 modules from TQ-Components
GmbH (http://www.tqc.de).
Signed-off-by: Wolfgang Grandegger <[EMAIL PROTECTED]>
---
arch/powerpc/boot/Makefile | 1
arch/powerpc/boot/dts/tqm8548.dts | 368 +++++++++
arch/powerpc/boot/wrapper | 2
arch/powerpc/configs/85xx/tqm8548_defconfig | 1094 ++++++++++++++++++
++++++++++
arch/powerpc/platforms/85xx/Kconfig | 8
arch/powerpc/platforms/85xx/tqm85xx.c | 15
6 files changed, 1485 insertions(+), 3 deletions(-)
create mode 100644 arch/powerpc/boot/dts/tqm8548.dts
create mode 100644 arch/powerpc/configs/85xx/tqm8548_defconfig
Index: linux-2.6-galak/arch/powerpc/boot/Makefile
===================================================================
--- linux-2.6-galak.orig/arch/powerpc/boot/Makefile
+++ linux-2.6-galak/arch/powerpc/boot/Makefile
@@ -255,6 +255,7 @@ image-$(CONFIG_MPC85xx_DS) += cuImage.m
cuImage.mpc8572ds
image-$(CONFIG_TQM8540) += cuImage.tqm8540
image-$(CONFIG_TQM8541) += cuImage.tqm8541
+image-$(CONFIG_TQM8548) += cuImage.tqm8548
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
Index: linux-2.6-galak/arch/powerpc/boot/dts/tqm8548.dts
===================================================================
--- /dev/null
+++ linux-2.6-galak/arch/powerpc/boot/dts/tqm8548.dts
@@ -0,0 +1,368 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or
modify it
+ * under the terms of the GNU General Public License as
published by the
+ * Free Software Foundation; either version 2 of the License, or
(at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "tqm,8548";
+ compatible = "tqm,8548", "tqm,85xx";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,[EMAIL PROTECTED] {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>; // from U-Boot
+ bus-frequency = <0>; // from U-Boot
+ clock-frequency = <0>; // from U-Boot
u-boot will add this for us so no need for them.
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR
+ bus-frequency = <0>;
+
+ [EMAIL PROTECTED] {
+ compatible = "fsl,8548-memory-controller";
Can you make this fsl,mpc8548...
I need to fix all the other device trees
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ L2: [EMAIL PROTECTED] {
+ compatible = "fsl,8548-l2-cache-controller";
Can you make this fsl,mpc8548
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy1: [EMAIL PROTECTED] {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: [EMAIL PROTECTED] {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: [EMAIL PROTECTED] {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ phy4: [EMAIL PROTECTED] {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ phy5: [EMAIL PROTECTED] {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <5>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet0: [EMAIL PROTECTED] {
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
+ };
+
+ enet1: [EMAIL PROTECTED] {
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ };
+
+ enet2: [EMAIL PROTECTED] {
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
+ };
+
+ enet3: [EMAIL PROTECTED] {
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy4>;
+ };
+
+ serial0: [EMAIL PROTECTED] {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ current-speed = <115200>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: [EMAIL PROTECTED] {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ current-speed = <115200>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ [EMAIL PROTECTED] { // global utilities reg
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ mpic: [EMAIL PROTECTED] {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+ };
+
+ [EMAIL PROTECTED] {
+ compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+ "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xe0005000 0x100>; // BRx, ORx, etc.
+
+ ranges = <
+ 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1
+ 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0
+ 2 0x0 0xe3000000 0x00008000 // CAN (2 x i82527)
+ 3 0x0 0xe3010000 0x00008000 // NAND FLASH
+
+ >;
+
+ [EMAIL PROTECTED],0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <1 0x0 0x8000000>;
+ bank-width = <4>;
+ device-width = <1>;
+
+ [EMAIL PROTECTED] {
+ label = "kernel";
+ reg = <0x00000000 0x00200000>;
+ };
+ [EMAIL PROTECTED] {
+ label = "root";
+ reg = <0x00200000 0x00300000>;
+ };
+ [EMAIL PROTECTED] {
+ label = "user";
+ reg = <0x00500000 0x07a00000>;
+ };
+ [EMAIL PROTECTED] {
+ label = "env1";
+ reg = <0x07f00000 0x00040000>;
+ };
+ [EMAIL PROTECTED] {
+ label = "env2";
+ reg = <0x07f40000 0x00040000>;
+ };
+ [EMAIL PROTECTED] {
+ label = "u-boot";
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ /* Note: CAN support needs be enabled in U-Boot */
+ [EMAIL PROTECTED],0 {
+ compatible = "intel,82527"; // Bosch CC770
+ reg = <2 0x0 0x100>;
+ interrupts = <4 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ [EMAIL PROTECTED],100 {
+ compatible = "intel,82527"; // Bosch CC770
+ reg = <2 0x100 0x100>;
+ interrupts = <4 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ /* Note: NAND support needs to be enabled in U-Boot */
+ [EMAIL PROTECTED],0 {
+ #address-cells = <0>;
+ #size-cells = <0>;
+ compatible = "fsl,upm-nand";
+ reg = <3 0x0 0x800>;
+ fsl,upm-addr-offset = <0x10>;
+ fsl,upm-cmd-offset = <0x08>;
+ chip-delay = <30>; // in micro-seconds
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ [EMAIL PROTECTED] {
+ label = "fs";
+ reg = <0x00000000 0x01000000>;
+ };
+ };
+ };
+ };
+
+ pci0: [EMAIL PROTECTED] {
+ cell-index = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ reg = <0xe0008000 0x1000>;
+ clock-frequency = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 28 */
+ 0xe000 0 0 1 &mpic 2 1
+ 0xe000 0 0 2 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ bus-range = <0 0>;
+ ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+ };
+
+ pci1: [EMAIL PROTECTED] {
+ cell-index = <2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 (PEX) */
+ 0x00000 0 0 1 &mpic 0 1
+ 0x00000 0 0 2 &mpic 1 1
+ 0x00000 0 0 3 &mpic 2 1
+ 0x00000 0 0 4 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
+ clock-frequency = <33333333>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe000a000 0x1000>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ [EMAIL PROTECTED] {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xc0000000 0x02000000 0
+ 0xc0000000 0 0x20000000
+ 0x01000000 0 0x00000000 0x01000000 0
+ 0x00000000 0 0x08000000>;
+ };
+ };
+};
Index: linux-2.6-galak/arch/powerpc/boot/wrapper
===================================================================
--- linux-2.6-galak.orig/arch/powerpc/boot/wrapper
+++ linux-2.6-galak/arch/powerpc/boot/wrapper
@@ -177,7 +177,7 @@ cuboot*)
*-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
platformo=$object/cuboot-85xx-cpm2.o
;;
- *-mpc85*|*-tqm8540|*-sbc85*)
+ *-mpc85*|*-tqm8540|*-tqm8548|*-sbc85*)
why not just *-tqm85*
platformo=$object/cuboot-85xx.o
;;
esac
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
