Jon, hmm, I tried the same, but with a 32MiB flash instead. And Linux-2.6.26-rc5 and the dtc-1.1.0.
On Monday 09 June 2008 23:30, Jon Smirl wrote: > This is my boot log: > > ff000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank > Intel/Sharp Extended Query Table at 0x0031 > Using buffer write method > cfi_cmdset_0001: Erase suspend on write enabled > RedBoot partition parsing not available > Creating 6 MTD partitions on "ff000000.flash": > 0x00000000-0x00040000 : "ubootl" > 0x00040000-0x00200000 : "kernel" > 0x00200000-0x00f00000 : "jffs2" > 0x00f00000-0x00f40000 : "uboot" > 0x00f40000-0x00f80000 : "oftree" > 0x00f80000-0x01000000 : "space" Here is mine (with DEBUG on in physmap_of.c): [...] mpc52xx MII bus: probed net eth0: Using PHY at MDIO address 0 of-flash fe000000.flash: of_flash device: fe000000-fdffffff of-flash: probe of fe000000.flash failed with error -16 TCP cubic registered [...] I'm confused about the "fe00000-fdffffff". These are the return values from the of_address_to_resource() call (in of_flash_probe() ). It should be "fe00000-ffffffff" instead. Regards, Juergen -- Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Vertretung Sued/Muenchen, Germany Phone: +49-8766-939 228 | Fax: +49-5121-206917-9 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev