Hi Mark,
On Monday 16 June 2008 08:19, Mark Ware wrote:
> Hello,
>
> I am preparing a board port (from 2.4.18!) for a proprietary board which
> has it's mdio on a different port than mdc. The current mii-bitbang
> driver in fs_enet assumes both pins are connected to port C. I have
> created a fairly simple patch to make this more flexible, but I'm new to
> device trees and am unsure how best to describe the situation in the
> dts.
>
> The current mdio node for CPM2 looks something like:
>
> [EMAIL PROTECTED] {
> device_type = "mdio";
> compatible = "fsl,cpm2-mdio-bitbang";
> #address-cells = <1>;
> #size-cells = <0>
> reg = <0x10d40 0x14>;
> fsl,mdio-pin = <12>;
> fsl,mdc-pin = <15>;
> }
>
> I have made mdio work on our board by adding a second reg range and
> using the first one for mdc and the second one for mdio:
>
> reg = <0x10d40 0x14 0x10d60 0x14>; // mdc=port D, mdio=port A
> fsl,mdio-pin = <12>; // PD12
> fsl,mdc-pin = <15>; // PC15
>
> The code remains backwards compatible, in that if only one reg range is
> present it is used for both.
>
> Is this a valid (and acceptable) way to extend the reg property?It is. Sergej Stepanov submitted similar patches some times ago. You can find them at http://www.spinics.net/lists/netdev/msg45778.html http://www.spinics.net/lists/netdev/msg47159.html > Is their a cleaner way I should look at? Using the GPIO lib might be cleaner. Have a look at http://www.nabble.com/-PATCH-0-2--MDIO-on-GPIO-support-for-the-fs_enet-driver-ts17468958.html for a patch. Best regards, -- Laurent Pinchart CSE Semaphore Belgium Chaussee de Bruxelles, 732A B-1410 Waterloo Belgium T +32 (2) 387 42 59 F +32 (2) 387 42 75
pgpyOuhpUGJ9F.pgp
Description: PGP signature
_______________________________________________ Linuxppc-dev mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-dev
