Hi Joel, > The series looks good. > > I've got a couple of patches on the ipmi list that this will conflict > with: > > https://sourceforge.net/p/openipmi/mailman/message/37345391/ > https://lore.kernel.org/all/20210903015314.177987-1-j...@jms.id.au/ > > If there's no feedback from others I suggest basing your series on top > of those, and sending them to Corey on the ipmi list to merge.
Looks good, will do. Thanks, Anton > Cheers, > > Joel > > > > > Signed-off-by: Anton Blanchard <an...@ozlabs.org> > > --- > > .../devicetree/bindings/ipmi/ibt-bmc.txt | 1 + > > drivers/char/ipmi/Kconfig | 8 ++- > > drivers/char/ipmi/bt-bmc.c | 69 > > +++++++++++++++++++ 3 files changed, 75 insertions(+), 3 > > deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/ipmi/ibt-bmc.txt > > b/Documentation/devicetree/bindings/ipmi/ibt-bmc.txt index > > 78ee716a950e..1b661daf0193 100644 --- > > a/Documentation/devicetree/bindings/ipmi/ibt-bmc.txt +++ > > b/Documentation/devicetree/bindings/ipmi/ibt-bmc.txt @@ -9,6 +9,7 > > @@ Required properties: > > - compatible : should be one of > > "aspeed,ast2400-ibt-bmc" > > "aspeed,ast2500-ibt-bmc" > > + "ibm,microwatt-ibt-bmc" > > - reg: physical address and size of the registers > > > > Optional properties: > > diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig > > index 8b2f0f675e5f..079302f4eef2 100644 > > --- a/drivers/char/ipmi/Kconfig > > +++ b/drivers/char/ipmi/Kconfig > > @@ -152,13 +152,15 @@ config IPMI_KCS_BMC_SERIO > > called kcs_bmc_serio. > > > > config BT_IPMI_BMC > > - depends on ARCH_ASPEED || COMPILE_TEST > > + depends on ARCH_ASPEED || PPC_MICROWATT || COMPILE_TEST > > depends on REGMAP && REGMAP_MMIO && MFD_SYSCON > > tristate "BT IPMI bmc driver" > > help > > Provides a driver for the BT (Block Transfer) IPMI > > interface > > - found on Aspeed SOCs (AST2400 and AST2500). The driver > > - implements the BMC side of the BT interface. > > + found on Aspeed SOCs (AST2400 and AST2500) as well as the > > OpenPOWER > > + LPC peripheral macro at > > + <https://github.com/OpenPOWERFoundation/lpcperipheral> > > + The driver implements the BMC side of the BT interface. > > > > config IPMB_DEVICE_INTERFACE > > tristate 'IPMB Interface handler' > > diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c > > index b48e04405ac4..24327b57c60b 100644 > > --- a/drivers/char/ipmi/bt-bmc.c > > +++ b/drivers/char/ipmi/bt-bmc.c > > @@ -41,6 +41,11 @@ > > #define BT_CR2_IRQ_HBUSY 0x40 > > #define ASPEED_BT_CR3 0xc > > > > +#define MICROWATT_IRQ_MASK 0x0 > > +#define MICROWATT_IRQ_STATUS 0x4 > > +#define IRQ_HOST_TO_BMC_ATTN 0x1 > > +#define IRQ_HOST_NOT_BUSY 0x2 > > + > > #define BT_CTRL 0x10 > > #define BT_CTRL_B_BUSY 0x80 > > #define BT_CTRL_H_BUSY 0x40 > > @@ -395,6 +400,27 @@ static irqreturn_t aspeed_bt_bmc_irq(int irq, > > void *arg) return IRQ_HANDLED; > > } > > > > +static irqreturn_t microwatt_bt_bmc_irq(int irq, void *arg) > > +{ > > + struct bt_bmc *bt_bmc = arg; > > + u32 reg; > > + int rc; > > + > > + rc = regmap_read(bt_bmc->map, bt_bmc->offset + > > MICROWATT_IRQ_STATUS, ®); > > + if (rc) > > + return IRQ_NONE; > > + > > + /* Interrupt wasn't something we knew about */ > > + if (!(reg & (IRQ_HOST_TO_BMC_ATTN | IRQ_HOST_NOT_BUSY))) > > + return IRQ_NONE; > > + > > + /* ack all pending IRQs */ > > + regmap_write(bt_bmc->map, bt_bmc->offset + > > MICROWATT_IRQ_STATUS, 0); + > > + wake_up(&bt_bmc->queue); > > + return IRQ_HANDLED; > > +} > > + > > static int aspeed_bt_bmc_config_irq(struct bt_bmc *bt_bmc, > > struct platform_device *pdev) > > { > > @@ -446,6 +472,48 @@ static const struct bt_bmc_ops > > aspeed_bt_bmc_ops = { .enable_bt = aspeed_enable_bt, > > }; > > > > +static int microwatt_bt_bmc_config_irq(struct bt_bmc *bt_bmc, > > + struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + int rc; > > + > > + bt_bmc->irq = platform_get_irq_optional(pdev, 0); > > + if (bt_bmc->irq < 0) > > + return bt_bmc->irq; > > + > > + rc = devm_request_irq(dev, bt_bmc->irq, > > microwatt_bt_bmc_irq, IRQF_SHARED, > > + DEVICE_NAME, bt_bmc); > > + if (rc < 0) { > > + dev_warn(dev, "Unable to request IRQ %d\n", > > bt_bmc->irq); > > + bt_bmc->irq = rc; > > + return rc; > > + } > > + > > + /* > > + * Configure the hardware to give us an interrupt whenever > > the H2B > > + * bit is set or the HBUSY bit is cleared. > > + * > > + * H2B will be asserted when the bmc has data for us; HBUSY > > + * will be cleared (along with B2H) when we can write the > > next > > + * message to the BT buffer > > + */ > > + rc = regmap_update_bits(bt_bmc->map, bt_bmc->offset + > > MICROWATT_IRQ_MASK, > > + (IRQ_HOST_TO_BMC_ATTN | > > IRQ_HOST_NOT_BUSY), > > + (IRQ_HOST_TO_BMC_ATTN | > > IRQ_HOST_NOT_BUSY)); + > > + return rc; > > +} > > + > > +static void microwatt_enable_bt(struct bt_bmc *bt_bmc) > > +{ > > +} > > + > > +static const struct bt_bmc_ops microwatt_bt_bmc_ops = { > > + .config_irq = microwatt_bt_bmc_config_irq, > > + .enable_bt = microwatt_enable_bt, > > +}; > > + > > static int bt_bmc_probe(struct platform_device *pdev) > > { > > struct bt_bmc *bt_bmc; > > @@ -530,6 +598,7 @@ static int bt_bmc_remove(struct platform_device > > *pdev) static const struct of_device_id bt_bmc_match[] = { > > { .compatible = "aspeed,ast2400-ibt-bmc", .data = > > &aspeed_bt_bmc_ops }, { .compatible = "aspeed,ast2500-ibt-bmc", > > .data = &aspeed_bt_bmc_ops }, > > + { .compatible = "ibm,microwatt-ibt-bmc", .data = > > µwatt_bt_bmc_ops }, { }, > > }; > > > > -- > > 2.31.1 > > >