On Fri, 2008-06-13 at 16:55 +0200, Stefan Roscher wrote:
> During corner case testing, we noticed that some versions of ehca 
> do not properly transition to interrupt done in special load situations.
> This can be resolved by periodically triggering EOI through H_EOI, 
> if eqes are pending.
> 
> Signed-off-by: Stefan Roscher <[EMAIL PROTECTED]>

Acked-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>

---

> As firmware team suggested I moved the call of the EOI h_call into 
> the handler function, this ensures that we will call EOI only when we 
> find a valid eqe on the event queue.
> Additionally I changed the calculation of the xirr value as Roland suggested.
> 
>  drivers/infiniband/hw/ehca/ehca_irq.c |    9 +++++++--
>  drivers/infiniband/hw/ehca/hcp_if.c   |   10 ++++++++++
>  drivers/infiniband/hw/ehca/hcp_if.h   |    1 +
>  3 files changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c 
> b/drivers/infiniband/hw/ehca/ehca_irq.c
> index ce1ab05..0792d93 100644
> --- a/drivers/infiniband/hw/ehca/ehca_irq.c
> +++ b/drivers/infiniband/hw/ehca/ehca_irq.c
> @@ -531,7 +531,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq)
>  {
>       struct ehca_eq *eq = &shca->eq;
>       struct ehca_eqe_cache_entry *eqe_cache = eq->eqe_cache;
> -     u64 eqe_value;
> +     u64 eqe_value, ret;
>       unsigned long flags;
>       int eqe_cnt, i;
>       int eq_empty = 0;
> @@ -583,8 +583,13 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq)
>                       ehca_dbg(&shca->ib_device,
>                                "No eqe found for irq event");
>               goto unlock_irq_spinlock;
> -     } else if (!is_irq)
> +     } else if (!is_irq) {
> +             ret = hipz_h_eoi(eq->ist);
> +             if (ret != H_SUCCESS)
> +                     ehca_err(&shca->ib_device,
> +                              "bad return code EOI -rc = %ld\n", ret);
>               ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt);
> +     }
>       if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE))
>               ehca_dbg(&shca->ib_device, "too many eqes for one irq event");
>       /* enable irq for new packets */
> diff --git a/drivers/infiniband/hw/ehca/hcp_if.c 
> b/drivers/infiniband/hw/ehca/hcp_if.c
> index 5245e13..415d3a4 100644
> --- a/drivers/infiniband/hw/ehca/hcp_if.c
> +++ b/drivers/infiniband/hw/ehca/hcp_if.c
> @@ -933,3 +933,13 @@ u64 hipz_h_error_data(const struct ipz_adapter_handle 
> adapter_handle,
>                                      r_cb,
>                                      0, 0, 0, 0);
>  }
> +
> +u64 hipz_h_eoi(int irq)
> +{
> +     unsigned long xirr;
> +
> +     iosync();
> +     xirr = (0xffULL << 24) | irq;
> +
> +     return plpar_hcall_norets(H_EOI, xirr);
> +}
> diff --git a/drivers/infiniband/hw/ehca/hcp_if.h 
> b/drivers/infiniband/hw/ehca/hcp_if.h
> index 60ce02b..2c3c6e0 100644
> --- a/drivers/infiniband/hw/ehca/hcp_if.h
> +++ b/drivers/infiniband/hw/ehca/hcp_if.h
> @@ -260,5 +260,6 @@ u64 hipz_h_error_data(const struct ipz_adapter_handle 
> adapter_handle,
>                     const u64 ressource_handle,
>                     void *rblock,
>                     unsigned long *byte_count);
> +u64 hipz_h_eoi(int irq);
>  
>  #endif /* __HCP_IF_H__ */

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to