If the imx-pcm-dma is required we need to have the module enabled. For
all NXP/FSL sound cards using the ASoC architecture this is the case but
in case of using the simple-audio-card sound card this isn't the case.
In such case the driver probe fails silently and the card isn't
available. It took a while to find the missing Kconfig. Make this easier
for others by printing a error if this the module isn't available but
required by the HW.
Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
---
sound/soc/fsl/fsl_sai.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 3e54f1f71c1e..2371da814b09 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -1152,8 +1152,11 @@ static int fsl_sai_probe(struct platform_device *pdev)
*/
if (sai->soc_data->use_imx_pcm) {
ret = imx_pcm_dma_init(pdev);
- if (ret)
+ if (ret) {
+ if (!IS_ENABLED(CONFIG_SND_SOC_IMX_PCM_DMA))
+ dev_err(dev, "Error: You must enable the
imx-pcm-dma support!\n");
goto err_pm_get_sync;
+ }
} else {
ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0);
if (ret)
--
2.30.2
