On Thu, Dec 29, 2022 at 07:01:37PM -0500, Sean Anderson wrote:
> This adds bindings for the SerDes devices. They are disabled by default
> to prevent any breakage on existing boards.
>
> Signed-off-by: Sean Anderson <sean.ander...@seco.com>
> ---
>
> (no changes since v4)
>
> Changes in v4:
> - Convert to new bindings
>
> Changes in v3:
> - New
>
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 260d045dbd9a..ecf9d830e36f 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -238,6 +238,24 @@ reset: syscon@1e60000 {
> reg = <0x0 0x1e60000 0x0 0x10000>;
> };
>
> + serdes1: serdes@1ea0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
> + reg = <0x0 0x1ea0000 0x0 0x2000>;
Can we start the properties with compatible (and reg) like most of other
device nodes?
Shawn
> + status = "disabled";
> + };
> +
> + serdes2: serdes@1eb0000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
> + reg = <0x0 0x1eb0000 0x0 0x2000>;
> + status = "disabled";
> + };
> +
> isc: syscon@1f70000 {
> compatible = "fsl,ls1088a-isc", "syscon";
> reg = <0x0 0x1f70000 0x0 0x10000>;
> --
> 2.35.1.1320.gc452695387.dirty
>
