[PATCH v13 14/15] arm64: dts: ls1088ardb: Add SFP cage

[Sean Anderson]

dpmac1 defaults to a fixed link. However, it has an SFP cage, so we can
determine more about the link (such as whether it's up/down) by
describing it. The GPIOs are part of the "QIXIS" FPGA. For now, just
model them as individual registers.

Signed-off-by: Sean Anderson <sean.ander...@seco.com>
---

Changes in v13:
- Split off SFP addition from serdes support

 .../boot/dts/freescale/fsl-ls1088a-rdb.dts    | 51 ++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts 
b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 391c2b8afa81..9fb1960f1258 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -10,11 +10,27 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
+
 #include "fsl-ls1088a.dtsi"
 
 / {
        model = "LS1088A RDB Board";
        compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+
+       sfp_slot: sfp {
+               compatible = "sff,sfp";
+               i2c-bus = <&sfp_i2c>;
+               los-gpios = <&los_stat 5 GPIO_ACTIVE_HIGH>;
+               tx-fault-gpios = <&los_stat 4 GPIO_ACTIVE_HIGH>;
+               tx-disable-gpios = <&brdcfg9 4 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&dpmac1 {
+       managed = "in-band-status";
+       pcs-handle = <&pcs1>;
+       sfp = <&sfp_slot>;
 };
 
 &dpmac2 {
@@ -170,6 +186,12 @@ rtc@51 {
                                interrupts-extended = <&extirq 0 
IRQ_TYPE_LEVEL_LOW>;
                        };
                };
+
+               sfp_i2c: i2c@6 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x6>;
+               };
        };
 };
 
@@ -184,8 +206,31 @@ nand@0,0 {
        };
 
        fpga: board-control@2,0 {
-               compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis",
+                            "simple-bus";
                reg = <0x2 0x0 0x0000100>;
+               ranges = <0x0 0x2 0x0 0x0000100>;
+
+               los_stat: gpio-controller@1d {
+                       #gpio-cells = <2>;
+                       compatible = "fsl,fpga-qixis-los-stat",
+                                    "ni,169445-nand-gpio";
+                       reg = <0x1d 0x1>;
+                       reg-names = "dat";
+                       gpio-controller;
+                       no-output;
+               };
+
+               brdcfg9: gpio-controller@59 {
+                       #gpio-cells = <2>;
+                       compatible = "fsl,fpga-qixis-brdcfg9",
+                                    "ni,169445-nand-gpio";
+                       reg = <0x59 0x1>;
+                       reg-names = "dat";
+                       gpio-controller;
+               };
        };
 };
 
@@ -202,6 +247,10 @@ &esdhc {
        status = "okay";
 };
 
+&pcs_mdio1 {
+       status = "okay";
+};
+
 &pcs_mdio2 {
        status = "okay";
 };
-- 
2.35.1.1320.gc452695387.dirty