VenkataKrishna wrote:
Dear Friends,
I want to ………
1. How to develop linux BSP to MPC8260.
The term "BSP" (Board Support Package) is not used much in linux-land.
By BSP you are probably referring to a boot program (bootrom) and a
linux configuration (kernel/drivers).
For a bootrom, I recommend u-boot. There are several 8260 boards in the
standard u-boot repository that you can start from and customize for
your board.
If you go this route, you will want to subscribe to the u-boot-users list
https://lists.sourceforge.net/lists/listinfo/u-boot-users
For more information, sorted from general to specific:
http://www.denx.de/
http://www.denx.de/en/Software/WebHome
http://www.denx.de/wiki/UBoot/WebHome
http://www.denx.de/wiki/UBoot/Documentation
http://www.denx.de/wiki/DULG/Manual
Browse the source:
http://git.denx.de/
2. where can I start to develop linux BSP.
Right from the comfort of your own linux computer! (Developing under
Windows/cygwin/colinux is possible, but everything is between five times
more difficult and infinitely more difficult. NOT recommended!)
3. what are tools available in market to develop linux BSP.
I would recommend downloading and installing ELDK from Denx. It is a
reliable and painless cross compiler (THANKS, Wolfgang & Co.!)
ftp://ftp.denx.de/pub/eldk/4.2/ppc-linux-x86/
in particular:
ftp://ftp.denx.de/pub/eldk/4.2/ppc-linux-x86/iso/ppc-2008-04-01_freescale.iso
Thanks Regards
Venkatakrishna Pari
You are welcome.
gvb
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
