> From: Frank Li <frank...@nxp.com>
> Subject: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a
> 
> Add suspend/resume support for Layerscape LS1043a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to 
> check if
> the controller has received the PME_To_Ack from the endpoint or not. So to be
> on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US
> before asserting the SoC specific PMXMTTURNOFF bit to complete the
> PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on
> the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset.
> 
> Signed-off-by: Frank Li <frank...@nxp.com>
Acked-by:  Roy Zang <roy.z...@nxp.com>
Roy

Reply via email to