[PATCH RFC 3/5] powerpc/prom: Add CPU info to hardware description string later

[Nathan Lynch via B4 Relay]

From: Nathan Lynch <nath...@linux.ibm.com>

cur_cpu_spec->cpu_name is appended to ppc_hw_desc before cur_cpu_spec
has taken on its final value. This is illustrated on pseries by
comparing the CPU name as reported at boot ("POWER8E (raw)") to the
contents of /proc/cpuinfo ("POWER8 (architected)"):

  $ dmesg | grep Hardware
  Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 \
    of:IBM,FW860.50 (SV860_146) hv:phyp pSeries

  $ grep -m 1 ^cpu /proc/cpuinfo
  cpu             : POWER8 (architected), altivec supported

Some 44x models would appear to be affected as well; see
identical_pvr_fixup().

This results in incorrect CPU information in stack dumps --
ppc_hw_desc is an input to dump_stack_set_arch_desc().

Delay gathering the CPU name until after all potential calls to
identify_cpu().

Signed-off-by: Nathan Lynch <nath...@linux.ibm.com>
Fixes: bd649d40e0f2 ("powerpc: Add PVR & CPU name to hardware description")
---
 arch/powerpc/kernel/prom.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 0b5878c3125b..c12b4434336f 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -327,6 +327,7 @@ static int __init early_init_dt_scan_cpus(unsigned long 
node,
                                          void *data)
 {
        const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+       const __be32 *cpu_version = NULL;
        const __be32 *prop;
        const __be32 *intserv;
        int i, nthreads;
@@ -398,7 +399,7 @@ static int __init early_init_dt_scan_cpus(unsigned long 
node,
                prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
                if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) {
                        identify_cpu(0, be32_to_cpup(prop));
-                       seq_buf_printf(&ppc_hw_desc, "0x%04x ", 
be32_to_cpup(prop));
+                       cpu_version = prop;
                }
 
                check_cpu_feature_properties(node);
@@ -409,6 +410,12 @@ static int __init early_init_dt_scan_cpus(unsigned long 
node,
        }
 
        identical_pvr_fixup(node);
+
+       // We can now add the CPU name & PVR to the hardware description
+       seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, 
mfspr(SPRN_PVR));
+       if (cpu_version)
+               seq_buf_printf(&ppc_hw_desc, "0x%04x ", 
be32_to_cpup(cpu_version));
+
        init_mmu_slb_size(node);
 
 #ifdef CONFIG_PPC64
@@ -846,9 +853,6 @@ void __init early_init_devtree(void *params)
 
        dt_cpu_ftrs_scan();
 
-       // We can now add the CPU name & PVR to the hardware description
-       seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, 
mfspr(SPRN_PVR));
-
        /* Retrieve CPU related informations from the flat tree
         * (altivec support, boot CPU ID, ...)
         */

-- 
2.43.0