On Tuesday 12 August 2008, Anton Vorontsov wrote: > > > Another possibility is that you got the wrong interrupt number > > > in the device-tree... > > > > > > Ben. > > > > The platform is the AMCC Sequoia board. We've built a little adapter to > > connect a compact flash card to the processor bus. I believe the > > interrupt selection in the device tree is correct, and I've checked over > > the u-boot settings for the IRQ line (active high, level sensitive). > > IDE IRQs are active-low.
IIRC, the CompactFlash interrupt is active-high. Best regards, Stefan _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev