I have just tried enabling I2C on a Sequoia board (kernel is DENX 2.6.26) and
doing that appears to corrupt the u-boot / kernel communications.
Prior to turning on I2C, I see the ethernet mac and kernel command line
correctly passed, but once I turn on I2C, the ethernet mac becomes 0 and the
kernel command line is missing many parameters. I'll paste in a good log, then
a bad one. The only configuration difference is that the bad one has
CONFIG_I2C_CHARDEV=y and CONFIG_I2C_IBM_IIC=y in the configuration.
I'll start digging into it, but if anyone has any experience or ideas regarding
I2C on PPC440, I'd appreciate your thoughts on this.
Steve
Good log:
=========
## Booting kernel from Legacy Image at fd400000 ...
Image Name: Linux-2.6.26.1-00033-g088efe4-di
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1801234 Bytes = 1.7 MB
Load Address: 00400000
Entry Point: 00400454
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading init Ramdisk from Legacy Image at fd900000 ...
Image Name: initramfs
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 2442283 Bytes = 2.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 0fcb8000, end 0ff0c42b ... OK
CPU clock-frequency <- 0x27bc86a4 (667MHz)
CPU timebase-frequency <- 0x27bc86a4 (667MHz)
/plb: clock-frequency <- 9ef21a9 (167MHz)
/plb/opb: clock-frequency <- 4f790d4 (83MHz)
/plb/opb/ebc: clock-frequency <- 34fb5e3 (56MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
Memory <- <0x0 0x0 0xffff000> (255MB)
ENET0: local-mac-address <- 00:10:ec:01:04:d0
ENET1: local-mac-address <- 00:10:ec:01:04:d1
zImage starting: loaded at 0x00400000 (sp: 0x0ff0d220)
Allocating 0x3dbc2c bytes for kernel ...
gunzipping (0x00000000 <- 0x0040e000:0x007ed9c8)...done 0x39c1c4 bytes
Using loader supplied ramdisk at 0xfcb8000-0xff0c42b
initrd head: 0x1f8b0808
Linux/PowerPC load: root=/dev/sda3 rw
ip=137.237.178.105:137.237.179.31:137.237.178.1:255.255.255.0:hydra_temp:eth0:off
panic=1 console=ttyS0,115200
Bad log:
========
## Booting kernel from Legacy Image at fd400000 ...
Image Name: Linux-2.6.26.1-00034-gf084326-di
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1811651 Bytes = 1.7 MB
Load Address: 00400000
Entry Point: 00400454
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading init Ramdisk from Legacy Image at fd900000 ...
Image Name: initramfs
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 2442283 Bytes = 2.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 0fcb8000, end 0ff0c42b ... OK
CPU clock-frequency <- 0x27bc86a4 (667MHz)
CPU timebase-frequency <- 0x27bc86a4 (667MHz)
/plb: clock-frequency <- 9ef21a9 (167MHz)
/plb/opb: clock-frequency <- 4f790d4 (83MHz)
/plb/opb/ebc: clock-frequency <- 34fb5e3 (56MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
/plb/opb/[EMAIL PROTECTED]: clock-frequency <- a8c000 (11MHz)
Memory <- <0x0 0x0 0xffff000> (255MB)
ENET0: local-mac-address <- 00:00:00:00:00:00
ENET1: local-mac-address <- 00:00:00:00:00:00
zImage starting: loaded at 0x00400000 (sp: 0x0ff0d220)
Allocating 0x3e1c48 bytes for kernel ...
gunzipping (0x00000000 <- 0x0040e000:0x007f3a24)...done 0x3a21c4 bytes
Using loader supplied ramdisk at 0xfcb8000-0xff0c42b
initrd head: 0x1f8b0808
Linux/PowerPC load: console=ttyS0,115200
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
