Jon Smirl wrote:
> mpc5200 interrupts have three cells in the device tree. How are these
> interpreted?
> Middle one is the interrupt number. Last one seems to always be zero.
> What does the first one do, edge/level?
>
> I searched through /Documentation and could find anything about three
> cells for interrupts.
>
> I understand the first one for gpio_wkup on interrupt 8. How does a
> gpio_wkup generate an interrupt on interrupt 3?
>
> gpio_wkup: [EMAIL PROTECTED] {
> compatible =
> "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> reg = <0xc00 0x40>;
> interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>;
> interrupt-parent = <&mpc5200_pic>;
> gpio-controller;
> #gpio-cells = <2>;
> };
See
http://lxr.linux.no/linux+v2.6.26.5/Documentation/powerpc/mpc52xx-device-tree-bindings.txt#L263
Wolfgang.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
