On Mon, Sep 15, 2008 at 08:53:53PM +0200, Peter Korsgaard wrote:
> From: peter Korsgaard <[EMAIL PROTECTED]>
> 
> Support uImage.<platform>, which are U-Boot multi component images
> containing a kernel, dtb and possibly an initrd.
> 
> Signed-off-by: Peter Korsgaard <[EMAIL PROTECTED]>
> ---
>  Documentation/powerpc/bootwrapper.txt |    4 ++++
>  arch/powerpc/boot/Makefile            |   11 +++++++++--
>  arch/powerpc/boot/wrapper             |   20 +++++++++++++++++++-
>  3 files changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/powerpc/bootwrapper.txt 
> b/Documentation/powerpc/bootwrapper.txt
> index d60fced..f0b34b3 100644
> --- a/Documentation/powerpc/bootwrapper.txt
> +++ b/Documentation/powerpc/bootwrapper.txt
> @@ -91,6 +91,10 @@ Currently, the following image format targets exist:
>                       a device tree to the kernel at boot.  If using an older
>                       version of U-Boot, then you need to use a cuImage
>                       instead.
> +   uImage.thinx:     U-Boot multi component image. Similar to uImage,

Change this to "uImage.%:" to match the rest of this document.

> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 717a3bc..41ab6aa 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -352,7 +359,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
>  clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
>       zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
>       zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
> -     otheros.bld *.dtb
> +     otheros.bld uImage.* *.dtb

Actually, you can probably make this "uImage*" instead because plain
'uImage' targets are missing from this list.

>  
>  # clean up files cached by wrapper
>  clean-kernel := vmlinux.strip vmlinux.bin
> diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
> index 965c237..b7c0b23 100755
> --- a/arch/powerpc/boot/wrapper
> +++ b/arch/powerpc/boot/wrapper
> @@ -153,7 +153,7 @@ coff)
>      lds=$object/zImage.coff.lds
>      link_address='0x500000'
>      ;;
> -miboot|uboot)
> +miboot|uboot|uboot-*)

Similarly, uboot and uboot-* can probably be collapsed to 'uboot*'

g.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to