USB is not working my hardware, so I booted my Efika and it's not working there either. This is with linus' current git.
Can anyone verify this? Or know what happened to USB? USB is loading but it is not finding anything plugged in. lsusb doesn't show anything. Last time I noticed it was working was about ten days ago. I don't use it everyday. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ASoC version 0.31 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 audit: initializing netlink socket (disabled) type=2000 audit(1222292382.243:1): initialized msgmni has been set to 247 for ipc namespace c0316b94 io scheduler noop registered io scheduler deadline registered (default) Macintosh non-volatile memory driver v1.1 Serial: MPC52xx PSC UART driver f0002000.serial: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC brd: module loaded loop: module loaded mpc52xx MII bus: probed net eth0: Using PHY at MDIO address 16 Driver 'sd' needs updating - please use bus_type methods Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i2c /dev entries driver usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16. tas5504_driver_init mpc52xx_i2s_driver_init digispeaker_driver_init ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. drivers/rtc/hctosys.c: unable to open rtc device (rtc0) net eth0: attached phy 16 to driver Generic PHY Sending DHCP requests .<6>PHY: f0003000:10 - Link is Up - 100/Full ., OK IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.109 IP-Config: Complete: device=eth0, addr=192.168.1.109, mask=255.255.255.0, gw=192.168.1.1, host=192.168.1.109, domain=, nis-domain=(none), bootserver=192.168.1.1, rootserver=192.168.1.4, rootpath= Looking up port of RPC 100003/3 on 192.168.1.4 Looking up port of RPC 100005/3 on 192.168.1.4 -- Jon Smirl [EMAIL PROTECTED] _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev