The QUICC Engine provides interrupts for a few I/O ports. This is
handled via a separate interrupt ID and managed via a triplet of
dedicated registers hosted by the SoC.
Implement an interrupt driver for those IRQs then add change
notification capability to the QUICC ENGINE GPIOs.
The number of GPIOs for which interrupts are supported depends on
the microcontroller:
- mpc8323 has 10 GPIOS supporting interrupts
- mpc8360 has 28 GPIOS supporting interrupts
- mpc8568 has 18 GPIOS supporting interrupts
Changes in v6:
- Changed mask local var to unsigned long instead of u32 to avoid build failure
on 64 bits (patch 4)
- Comments from Rob taken into account except the comment on
fsl,<chip>-qe-pario-bank becoming fsl,chip-qe-pario-bank as I don't know what
to do.
Changes in v5:
- Replaced new DT property "fsl,qe-gpio-irq-mask" by a mask encoded
in the of_device_id table
- Converted QE QPIO DT bindings to DT schema
Changes in v4:
- Removed unused headers
- Using device_property_read_u32() instead of of_property_read_u32()
Changes in v3:
- Splited dt-bindings update out of patch "soc: fsl: qe: Add support of IRQ in
QE GPIO"
- Reordered DTS node exemples iaw dts-coding-style.rst
Changes in v2:
- Fixed warning on PPC64 build (Patch 1)
- Using devm_kzalloc() instead of kzalloc (Patch 2)
- Stop using of-mm-gpiochip (New patch 3)
- Added fsl,qe-gpio-irq-mask propertie in DT binding doc (Patch 4)
- Fixed problems reported by 'make dt_binding_check' (Patch 5)
Christophe Leroy (7):
soc: fsl: qe: Add an interrupt controller for QUICC Engine Ports
soc: fsl: qe: Change GPIO driver to a proper platform driver
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Add support of IRQ in QE GPIO
dt-bindings: soc: fsl: qe: Add an interrupt controller for QUICC
Engine Ports
dt-bindings: soc: fsl: qe: Convert QE GPIO to DT schema
dt-bindings: soc: fsl: qe: Add support of IRQ in QE GPIO
.../gpio/fsl,mpc8323-qe-pario-bank.yaml | 72 ++++++
.../soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml | 58 +++++
.../bindings/soc/fsl/cpm_qe/qe/par_io.txt | 26 +--
arch/powerpc/platforms/Kconfig | 1 -
drivers/soc/fsl/qe/Makefile | 2 +-
drivers/soc/fsl/qe/gpio.c | 209 ++++++++++++------
drivers/soc/fsl/qe/qe_ports_ic.c | 156 +++++++++++++
7 files changed, 434 insertions(+), 90 deletions(-)
create mode 100644
Documentation/devicetree/bindings/gpio/fsl,mpc8323-qe-pario-bank.yaml
create mode 100644
Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-ports-ic.yaml
create mode 100644 drivers/soc/fsl/qe/qe_ports_ic.c
--
2.49.0
