On Sep 29, 2008, at 7:35 AM, Martyn Welch wrote:
Support for the SBC610 VPX Single Board Computer from GE Fanuc
(PowerPC
MPC8641D).
Fixup to correctly reconfigure USB, provided by an NEC uPD720101,
after
device is reset. This requires a set of chip specific registers in the
devices configuration space to be correctly written, enabling all
ports
and switching the device to use an external 48-MHz Oscillator.
Signed-off-by: Martyn Welch <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/86xx/gef_sbc610.c | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
applied
- k
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
