The Freescale Elo DMA driver binds to all DMA channels in the device tree that
are compatible with "fsl,eloplus-dma-channel". This conflicts with the sound
drivers for the MPC8610 HPCD. On this board, the SSI uses two DMA channels and
therefore those channels are not available for general purpose use. We
change the compatible properties for these channels "fsl,ssi-dma-channel".
This works because the sound drivers don't actually check the compatible
property when it grabs channels.
Signed-off-by: Timur Tabi <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 0f3a36e..3f4c610 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -237,7 +237,7 @@
dma00: [EMAIL PROTECTED] {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,eloplus-dma-channel";
+ "fsl,ssi-dma-channel";
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
@@ -245,7 +245,7 @@
};
dma01: [EMAIL PROTECTED] {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,eloplus-dma-channel";
+ "fsl,ssi-dma-channel";
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
--
1.5.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
