run_vmtests.sh contains special handling to ensure the hwpoison_inject
module is available for the memory-failure tests. This logic was
implemented outside of run_test(), making the setup category-specific
but managed globally.

Move the hwpoison_inject handling into run_test() and restrict it
to the memory-failure category so that:
1. the module is checked and loaded only when memory-failure tests run,
2. the test is skipped if the module or the debugfs interface
(/sys/kernel/debug/hwpoison/) is not available.
3. the module is unloaded after the test if it was loaded by the script.

This localizes category-specific setup and makes the test flow
consistent with other per-category preparations.

While updating this logic, fix the module availability check.
The script previously used:

        modprobe -R hwpoison_inject

The -R option prints the resolved module name to stdout, causing every
run to print:

        hwpoison_inject

in the test output, even when no action is required, introducing
unnecessary noise.

Replace this with:

        modprobe -n hwpoison_inject

which verifies that the module is loadable without producing output,
keeping the selftest logs clean and consistent.

Also, ensure that skipped tests do not override a previously recorded
failure. A skipped test currently sets exitcode to ksft_skip even if a
prior test has failed, which can mask failures in the final exit status.
Update the logic to only set exitcode to ksft_skip when no failure has
been recorded.

Fixes: ff4ef2fbd101 ("selftests/mm: add memory failure anonymous page test")
Reviewed-by: Miaohe Lin <[email protected]>
Tested-by: Venkat Rao Bagalkote <[email protected]>
Signed-off-by: Sayali Patil <[email protected]>
---
 tools/testing/selftests/mm/run_vmtests.sh | 52 ++++++++++++++---------
 1 file changed, 33 insertions(+), 19 deletions(-)

diff --git a/tools/testing/selftests/mm/run_vmtests.sh 
b/tools/testing/selftests/mm/run_vmtests.sh
index d8468451b3a3..eb6f0ae48cc7 100755
--- a/tools/testing/selftests/mm/run_vmtests.sh
+++ b/tools/testing/selftests/mm/run_vmtests.sh
@@ -235,6 +235,7 @@ pretty_name() {
 run_test() {
        if test_selected ${CATEGORY}; then
                local skip=0
+               local LOADED_HWPOISON_INJECT_MOD=0
 
                # On memory constrainted systems some tests can fail to 
allocate hugepages.
                # perform some cleanup before the test for a higher success 
rate.
@@ -250,6 +251,28 @@ run_test() {
                        fi
                fi
 
+               # Ensure hwpoison_inject is available for memory-failure tests
+               if [ "${CATEGORY}" = "memory-failure" ]; then
+                       # Try to load hwpoison_inject if not present.
+                       HWPOISON_DIR=/sys/kernel/debug/hwpoison/
+                       if [ ! -d "$HWPOISON_DIR" ]; then
+                               if ! modprobe -n hwpoison_inject > /dev/null 
2>&1; then
+                                       echo "Module hwpoison_inject not found, 
skipping..." \
+                                               | tap_prefix
+                                       skip=1
+                               else
+                                       modprobe hwpoison_inject > /dev/null 
2>&1
+                                       LOADED_HWPOISON_INJECT_MOD=1
+                                       if [ ! -d "$HWPOISON_DIR" ]; then
+                                               echo "hwpoison debugfs 
interface not present" \
+                                                       | tap_prefix
+                                               skip=1
+                                       fi
+                               fi
+                       fi
+
+               fi
+
                local test=$(pretty_name "$*")
                local title="running $*"
                local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -)
@@ -261,6 +284,12 @@ run_test() {
                else
                        local ret=$ksft_skip
                fi
+
+               # Unload hwpoison_inject if we loaded it
+               if [ "${LOADED_HWPOISON_INJECT_MOD}" = "1" ]; then
+                       modprobe -r hwpoison_inject > /dev/null 2>&1
+               fi
+
                count_total=$(( count_total + 1 ))
                if [ $ret -eq 0 ]; then
                        count_pass=$(( count_pass + 1 ))
@@ -270,7 +299,9 @@ run_test() {
                        count_skip=$(( count_skip + 1 ))
                        echo "[SKIP]" | tap_prefix
                        echo "ok ${count_total} ${test} # SKIP" | tap_output
-                       exitcode=$ksft_skip
+                       if [ $exitcode -eq 0 ]; then
+                               exitcode=$ksft_skip
+                       fi
                else
                        count_fail=$(( count_fail + 1 ))
                        echo "[FAIL]" | tap_prefix
@@ -531,24 +562,7 @@ CATEGORY="page_frag" run_test ./test_page_frag.sh 
nonaligned
 
 CATEGORY="rmap" run_test ./rmap
 
-# Try to load hwpoison_inject if not present.
-HWPOISON_DIR=/sys/kernel/debug/hwpoison/
-if [ ! -d "$HWPOISON_DIR" ]; then
-       if ! modprobe -q -R hwpoison_inject; then
-               echo "Module hwpoison_inject not found, skipping..."
-       else
-               modprobe hwpoison_inject > /dev/null 2>&1
-               LOADED_MOD=1
-       fi
-fi
-
-if [ -d "$HWPOISON_DIR" ]; then
-       CATEGORY="memory-failure" run_test ./memory-failure
-fi
-
-if [ -n "${LOADED_MOD}" ]; then
-       modprobe -r hwpoison_inject > /dev/null 2>&1
-fi
+CATEGORY="memory-failure" run_test ./memory-failure
 
 if [ "${HAVE_HUGEPAGES}" = 1 ]; then
        echo "$orig_nr_hugepgs" > /proc/sys/vm/nr_hugepages
-- 
2.52.0


Reply via email to