From: "Brandeburg, Jesse" <[EMAIL PROTECTED]> Date: Thu, 23 Oct 2008 14:50:06 -0700
> Chris Friesen wrote: > > I tried booting a post 2.6.27 -git on a Motorola ATCA6101 (very > > similar to a Maple board). The first time I booted I got the first > > log below via the serial console. I rebooted and got as far as a > > login prompt. I was able to log in via the serial console, but then > > got an almost identical oops again, as shown in the second log below. > > > > I configed out the gigE drivers for the backplane so the only > > remaining network link was the e100 link used for booting, but the > > problem remained. > > > > Anyone have any idea what might be causing this? > > > > Thanks, > > > > Chris > > > > > > Starting xinetd: [ OK ] > > Starting cron: [ OK ] > > Unable to handle kernel paging request for data at address 0x00100108 > > that 00100108 pattern looks familiar, I'm not much help here, but I think > that had something to do with the list management of the poll_list in a > netdev struct. > > so now you just have to figure out why someone's netdev struct is becoming > NULL. :-) Usually this is an indication of returning the wrong value from the driver's ->poll() routine. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev