On 28/10/2026 15:34, Lefteris Koutrakis wrote:
> Add initial support for the WatchGuard Firebox T30 board based on the
> PowerPC architecture, updating the fsl Makefile and adding the new DTS file.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597

Missing DCO. Please read carefully submitting patches.


> ---
>  arch/powerpc/boot/dts/fsl/Makefile        |   2 +
>  arch/powerpc/boot/dts/fsl/firebox-t30.dts | 398 ++++++++++++++++++++++
>  2 files changed, 400 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/fsl/firebox-t30.dts
> 
> diff --git a/arch/powerpc/boot/dts/fsl/Makefile 
> b/arch/powerpc/boot/dts/fsl/Makefile
> index d2cc8e1f0..0a5c8b596 100644
> --- a/arch/powerpc/boot/dts/fsl/Makefile
> +++ b/arch/powerpc/boot/dts/fsl/Makefile
> @@ -3,6 +3,7 @@
>  dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard 
> $(src)/*.dts))
>  
>  # MPC85xx platforms
> +dtb-$(CONFIG_MPC85xx_RDB) += firebox-t30.dtb
>  dtb-$(CONFIG_BSC9131_RDB) += bsc9131rdb.dtb
>  dtb-$(CONFIG_BSC9132_QDS) += bsc9132qds.dtb
>  dtb-$(CONFIG_C293_PCIE) += c293pcie.dtb
> @@ -44,3 +45,4 @@ dtb-$(CONFIG_GEF_SBC310) += gef_sbc310.dtb
>  dtb-$(CONFIG_GEF_SBC610) += gef_sbc610.dtb
>  dtb-$(CONFIG_GEF_PPC9A) += gef_ppc9a.dtb
>  dtb-$(CONFIG_MVME7100) += mvme7100.dtb
> +dtb-$(CONFIG_MPC85xx_RDB) += firebox-t30.dtb
> diff --git a/arch/powerpc/boot/dts/fsl/firebox-t30.dts 
> b/arch/powerpc/boot/dts/fsl/firebox-t30.dts
> new file mode 100644
> index 000000000..6e9ec7f90
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/firebox-t30.dts
> @@ -0,0 +1,398 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/include/ "p1020si-pre.dtsi"
> +
> +/ {
> +     model = "Watchguard Firebox T30";
> +     compatible = "watchguard,firebox-t30", "fsl,P1020RDB";

Missing bindings, but not sure if it matters for PowerPC at all.

Best regards,
Krzysztof

Reply via email to