On Tue, Nov 3, 2026 at 10:52 AM Vincent Jardin via B4 Relay <[email protected]> wrote:
> From: Vincent Jardin <[email protected]> > > The LX2160A muxes its IIC, XSPI, SDHC, UART, IRQ and EVT pads from > fields of the RCW, read-only in RCWSR12..14 of DCFG and changed at > runtime through the same fields of the override registers in its DCSR > view, which read 0 until written. > > Since commit 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c > gpio to support bus recovery") Linux drives them with pinctrl-single on > the override registers, so its first pin state clears every other field > of the word: a board whose RCW programs a non-zero pad mux loses those > pads at the first I2C probe. > > Add a driver for the pad mux as a child of the DCFG node: the fields > of RCWSR12..14 and their encoding. > Then pin states select them with the generic function and groups > properties, and every change goes through the RCW override > of fsl-guts, which reads the status register, writes the override and > waits for the status register to follow. > > Signed-off-by: Vincent Jardin <[email protected]> Does this have compile-time dependencies on the other patches or can it be applied separately to the pinctrl tree once the maintainers are happy? Yours, Linus Walleij
