ibmveth receives on a single RX queue with one interrupt, so all of a virtual ethernet adapter's receive processing runs on one CPU. Power11 firmware can give the adapter several RX queues, each with its own interrupt and buffers.
This series only reshapes the existing RX path: open/close, buffer pools, interrupts, replenish and poll now take a queue index. IBMVETH_MAX_RX_QUEUES stays 1, so every loop runs once. Same hypercalls, same ethtool behaviour, no new ABI. Multi-queue enable is a later series. Patches 1-5 move the open/close path onto per-queue helpers. Patch 6 moves LAN registration and teardown out of open()/close(). Patch 7 passes the queue index through replenish and poll. Patch 8 splits poll into per-slot helpers. This series was split from an earlier posting of the full multi-queue work [1], which was too large to review as one [2]. Two related bug fixes go to net-next in a separate thread; neither depends on the other, and they apply in either order. Tested: PowerVM LPAR, one RX queue. ifdown/up under iperf3, MTU change, ethtool -L rx 2 rejected, TX shrink under traffic. [1] https://lore.kernel.org/netdev/[email protected]/ [2] https://lore.kernel.org/netdev/[email protected]/ Mingming Cao (8): ibmveth: Prepare MQ RX adapter data structures ibmveth: Refactor RX resource allocation for MQ RX bring-up ibmveth: Refactor buffer pool management for per-queue MQ RX ibmveth: Refactor RX interrupt control for MQ RX queues ibmveth: Refactor TX resource allocation in open/close paths ibmveth: Add RX queue register helpers for MQ ibmveth: Pass the RX queue index through replenish and poll ibmveth: Split RX poll into per-slot helpers for MQ drivers/net/ethernet/ibm/ibmveth.c | 1344 +++++++++++++++++++--------- drivers/net/ethernet/ibm/ibmveth.h | 15 +- 2 files changed, 928 insertions(+), 431 deletions(-) base-commit: 6bc9aed3994cb04708fef02dd6d2f1cc5c5e8229 -- 2.50.1 (Apple Git-155)
