On Wed, Nov 18, 2026 at 11:40:00AM +0100, Lukas Wunner wrote: > Bjorn suggests "the PCI core should do pci_enable_pcie_error_reporting() > independent of whether the device has an AER Capability": > > https://lore.kernel.org/r/20260826212619.GA1566339@bhelgaas/ > > This is done in patch [7/7]. The preceding patches contain prep work. > > For context, PCIe r7.1 sec 6.2.1 defines two error reporting paradigms: > AER and baseline capability. The latter relies (solely) on the error > enable/status bits in the Device Control and Device Status registers, > which exist on every PCIe device. The kernel has supported the AER > paradigm for 20 years. With the present series, it gains support for > the baseline capability paradigm. > > Patches [1/7] and [2/7] reinstate DPC on AER-incapable Downstream Ports. > The kernel used to support this until 2018. It is hereby fixed because > it eases introduction of baseline capability error reporting in the > subsequent patches. > > > Changes v1 -> v2: > > * Patch [1/7]: > * On AER-capable devices, infer severity from AER Extended Capability > instead of Device Status register because the latter also logs masked > errors (Sathya). > * Fix storytelling in commit message because 4e5fad429bd1 changed > behavior, not 708b20003624 (Sathya). > > * Patch [3/7]: > * New patch to clear error status bits more selectively (sashiko). > > * Patch [4/7]: > * Clear Fatal Errors as well on recovery failure (Sathya, sashiko). > > * Patch [6/7]: > * Amend kernel-doc of pci_aer_unmask_internal_errors() (Sathya). > > * Patch [7/7]: > * Convert AER severity to Device Status bit with new severity2devsta[] > array, instead of renumbering AER severity (sashiko). > * On entry of aer_get_device_error_info(), clear info->mask and > info->first_error (Sathya, sashiko). > * Emit "(no details available)" message for AER-incapable devices > as well as for devices whose AER registers are deliberately not > read on Fatal Errors (Sathya). > * Amend commit message to inform that System Errors may be raised > by AER-incapable devices if they have no AER- or DPC-capable > port in their ancestry (Sathya). > > Link to v1: > > https://lore.kernel.org/r/[email protected]/ > > > Lukas Wunner (6): > PCI/DPC: Avoid access to non-existent AER capability > PCI/DPC: Reinstate support for AER-incapable ports > PCI/ERR: Clear error status bits more selectively > PCI/AER: Drop AER native check from handles_cxl_errors() > PCI/AER: Move AER capability check out of pcie_aer_is_native() > PCI/AER: Enable baseline capability error reporting > > Yury Murashka (1): > PCI/ERR: Avoid stale error status bits on recovery failure > > .../ABI/testing/sysfs-bus-pci-devices-aer | 26 +++++-- > Documentation/PCI/pcieaer-howto.rst | 9 +-- > drivers/pci/pcie/aer.c | 76 +++++++++++++------ > drivers/pci/pcie/aer_cxl_rch.c | 3 +- > drivers/pci/pcie/dpc.c | 46 +++++++---- > drivers/pci/pcie/err.c | 14 +++- > 6 files changed, 120 insertions(+), 54 deletions(-)
Applied to pci/aer for v7.5, thanks!
