Hi Nanda, This is happening because you don't have access to http://www.bitshrine.org/gpp for some reason.
If LTIB needs to download sources to build a package, it will get them from bitshrine.org. Can you check that you are able to access this URL from the command line with wget. Regards, Stuart On Thu, 2008-11-20 at 18:30 +0000, nanda wrote: > Hi All, > Iam forwarding the mail which I have posted to powerpc linux list > Linuxppc-dev@ozlabs.org > =================================================== > > Iam getting the below error during the generation of > rootfs.ext2.gz.uboot (Power PC Linux RAM Disk Image) and uImage (Power > PC Linux Kernel Image) for linux-2.6.20.6 kernel on the power PC MPC > 8360E MDS using ltib tool. > > "Testing ppp_url connectivity: FAIL, disabling > > Testing gpp_url connectivity: FAIL, disabling > > No network download connection available" > > I did the following steps, but Iam unable to generate the > rootfs.ext2.gz.uboot > > - In the ltib directory > > ./ltib --configure > > In the configure menu, I specified the following, before saving the > configs > > - Tool chain as (gcc-3.4.3/glibc-2.3.3) > > - uboot 1.1.3 > > - "Kernel (local linux directory build)" which refers to the local > directory where linux-2.6.20.6 is placed > > - "Kernel config file"specified as mpc8360emds_defconfig, which is the > file copied > from /home/nanda/linux2.6.20.6/arch/powerpc/configs/mpc8360emds_defconfig to > the ltib/config/platform/mpc8360epb directory) > > - Linux Target Architecture as "powerpc" > > After the above process by saving the configuration (it started > building kernel and generated uImage) and failed in the below place > (Refer also the attached build.txt file) > > ================================ > > Processing: skell > > =================== > > Testing ppp_url connectivity: FAIL, disabling > > Testing gpp_url connectivity: FAIL, disabling > > No network download connection available > > Started: Thu Nov 20 14:44:45 2008 > > Ended: Thu Nov 20 14:57:32 2008 > > Elapsed: 767 seconds > > Build Failed > > ===================================== > > I have attached the below files for boot and build logs with this > mail, > > 1) defconfig.dev - default config generated for "./ltib configure" > from config/platform/mpc8360epb > > 2) build.txt - Error build during "./ltib configure" output > > 3) mpc8360emds_defconfig - Default config file > from /home/nanda/linux2.6.20.6/arch/powerpc/configs/ > > The end result was I could only see the uImage generated without > rootfs.ext2.gz.uboot. Please clarify on the same > > Thanks in advance, > > Regards, > > Nanda > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
